Abstract:In this study, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B-K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

The Research Development of Mechanical Testing Methods for Liquid Composites

Application of Liquid Composite Molding Technology on Aeronautics

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Simulation method for filling stage in liquid composite molding based on a two-phase flow volume of fluid model

Non-isothermal simulation on injection/mold temperatures in liquid composite molding process

A Method to Measure Residual Stress of Liquid Molding Compound by In-Situ Characterizations

A Study of the Effects of Moisture on Composite-to-Metal Double-Lap Shear Joints

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Coupled filling-curing simulation and optimized design of cure cycle in liquid composite molding

3D actual microstructure-based modeling of non-isothermal infiltration behavior and void formation in liquid composite molding

Critical Void Content for Thermoset Composite Laminates

On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding

Investigation of forming optimization of composite tubes based on liquid impact forming

Recent Development in Liquid Metal Materials

A Novel Methodology to Research the Residual Compressive Mechanical Properties of Composite Stiffened Panel after Low Velocity Impact Based on Quantification Damage Simulation

Advances in liquid metal composites: properties, applications, and future prospects

Investigations on the Mechanical Properties of Composite T-Joints with Defects under Bending Loading

A review on thermal and electrical behaviours of liquid metal-based polymer composites

A Comparative Study on the Mechanical Properties of Open-Hole Carbon Fiber-Reinforced Thermoplastic and Thermosetting Composite Materials

Modeling of Void Formation Based on Non-isothermal Conditions in Liquid Composite Molding for Plain-weave Fabric

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading