Abstract:Modified attapulgite (ATP-PS) grafted with polystyrene (PS) was prepared based on Pickering emulsion polymerization. The characterization of ATP-PS was studied by transmission electronic microscopy (TEM), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectrometer (FTIR) and contact angle analysis. TEM analysis showed that the surface of ATP-PS was coated with PS organic layer; XPS analysis showed that the proportion of C element in ATP-PS was much larger than that of ATP; FTIR analysis found that ATP-PS had more PS specific functional group peaks than that of ATP; Moreover, contact angle results showed that the hydrophobicity of ATP-PS was significantly improved compared with ATP. The above characterization analysis proved that the modification of ATP-PS was successful. Moreover, polyphenylene sulfide (PPS) hydrophobic porous membrane was prepared with 1-chloronaphthalene and dibutyl phthalate as mixed diluents and ATP-PS as additives. The results showed that 0.8 wt% of ATP-PS had a great effect on the structure and performance of the membrane. With the increasing of the mass proportion of ATP-PS in the preparation of PPS base membrane, the microstructure of PPS based membrane was changed from blocky bicontinuous to spherical granular bicontinuous. When the addition amount of ATP-PS was 0.8 wt% of the total mass of PPS base membrane, PPS based membrane had strong hydrophobicity and organic solvent affinity, and its n -butanol flux could reach 106.9642 L m −2 h −1 bar −1 . The rheological properties of PPS based membrane showed that ATP-PS was well compatible with the PPS, and ATP-PS was beneficial to crosslink between PPS molecular chains, thereby increasing the mechanical properties of PPS based membrane. Phase transition analysis demonstrated that ATP-PS (0.8 wt%) increased the melting temperature (2.34 °C) and crystallization temperature (2.63 °C) of PPS based membrane compared to PPS, thus allowing PPS to complete the phase transition at higher temperature interval during film formation, resulting in a stable microscopic cluster structure. Based on hydrophobic porous PPS membrane, PPS/ATP-PS/TA nanocomposites membrane with ATP-PS selective layer was prepared by co-deposition of tannic acid (TA) and ATP-PS on the surface of PPS membrane. The performance of PPS/ATP-PS/TA nanocomposites membrane was studied, which showed that the n -butanol flux of PPS/ATP-PS/TA nanocomposites membrane was 61.2913 L m −2 h −1 bar −1 . More importantly, the simulated filtration performance of MB dye organic waste liquid (the solvent is n -butanol) showed that the maximum rejection rate of MB dye reached 99.82%. These results demonstrate that PPS/ATP-PS/TA nanocomposites membrane will have potential application in the filtration of organic dye wastewater.

Core-shell Attapulgite@polyaniline Composite Particles Via in Situ Oxidative Polymerization

Preparation and Characterization of Polyaniline/Mmt Conductive Composites

Core-shell attapulgite@polypyrrole composite with well-defined corn cob-like morphology via self-assembling and in situ oxidative polymerization

Synthesis and Characterizations of Attapulgite Reinforced Branched Poly(butylene Succinate) Nanocomposites

Preparation and properties of polypropylene/org-attapulgite nanocomposites

Preparation and adsorption property of attapulgite/carbon nanocomposite

Preparation of polystyrene/polyaniline core/shell structured particles and their epoxy-based conductive composites

Preparation of polyaniline/vermiculite clay nanocomposites by in situ chemical oxidative grafting polymerization

Fabrication of Conducting Polyaniline‐coated Halloysite Coaxial Structure Nanocomposites Via in Situ Oxidative Graft Polymerization

Thermal and dynamic mechanical properties of attapulgite reinforced poly(butylene succinate-co-1,2- octanediol succinate) nanocomposites

Synthesis of Poly(Butylene Terephthalate)/Attapulgite Nanocomposites by In-Situ Polymerization and Its Crystallization Behavior

Improving Capacitance Performance of Attapulgite/polypyrrole Composites by Introducing Rhodamine B

Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester

Effects of modified attapulgite on the properties of attapulgite/epoxy nanocomposites

Polyaniline/Graphitenanosheets/Eu<sup>3+</sup>Nanocomposite: Synthesis and Characterization

Research Progress of Polymer/Attapulgite Nanocomposites

Facile Fabrication and Characterization of Novel Polyaniline/titanate Composite Nanotubes Directed by Block Copolymer

Controlling the Structure and Morphology of Monodisperse Polystyrene/Polyaniline Composite Particles

Preparation, performance and structure-properties relationship of polyphenylene sulfide/ATP-PS/co-deposition of tannic acid nanocomposites membrane

Poly(Ethylene Terephthalate)/Attapulgite Nanocomposites: Preparation, Structure, and Properties

A facile strategy for synthesis of multilayer and conductive organo-silica/polystyrene/polyaniline composite particles.