Abstract:Reverse osmosis membranes have been used to produce high-quality reclaimed water for portable and industrial use, but face inevitable fouling problems. In the constant flux RO membrane operation, fouling is manifested as increase in operational pressure. However, the pressure–time curves have no consistent form, and there’s a lack of pressure–time models that is capable of fitting various shapes of curves. In this study, the pressure–time curves of RO membranes were summarized into 3 types according to their change in pressure increasing rate. Each type of curve was speculated to be caused by a specific density change pattern of the fouling layer. An Integrated Spherical Diffusion Cell (SDC) Model was developed for the pressure–time relationships of Type I curves (pressure increasing rate increases with time) and Type III curves (pressure increasing rate decreases with time). Time-course pressure data of Type I and III curves were collected from literature, and the Integrated SDC model fitted these data better than other models derived from literature. Over 70% of R2 exceeded 0.90 for Type I curves and over 85% of R2 exceeded 0.88 for Type III curves. Furthermore, the Integrated SDC Model also showed superior fitting performance to the operational data of the full-scale RO system in the Changi NEWater plant. The model could characterize the fouling tendency by the model parameters, and predict subsequent pressure growth with the pressure data within 20% increase compared to the original pressure. For 10 out of 14 sets of data, the relative error of the predicted final pressure to the actual final pressure was below 10%. The findings are well-applied to industrial practice and may enable further research in the pressure growth pattern of constant flux RO filtration, assuring stable operation of full-scale RO systems.

Determination of operational pressure of NF membrane in drinking water treatment

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly(vinyl Chloride) Hollow Fiber Membrane

Optimal Design of Nanofiltration System for Surface Water Treatment

Preparation and Characterization of Low-Pressure Nanofiltration Membranes and the Application in the Separation Process of Dye Molecules

Comparison of nanofiltration and reverse osmosis membrane technologies in the advanced treatment of printing and dyeing wastewater

Performance of Nanofiltration and Reverse Osmosis Membranes in Metal Effluent Treatment

EXPERIMENTAL STUDY OF THE PARAQUAT WASTEWATER TREATMENT WITH NANO-FILTRATION

Performance and membrane fouling characteristics of a drinking water multistage NF system based on membrane autopsy from a full-scale system

Influences of Operating Conditions on Water Softening with NF90 Membrane

Tailored Ultra-Low Pressure Nanofiltration Membranes for Advanced Drinking Water Treatment

Yangtze River Water Treatment by Spiral UF Membrane with Coagulation Pretreatment

Exploring the pressure change of reverse osmosis filtration: Time-course pressure curves and a novel model for mechanism study and NEWater application

Comparison of Pre-Treatment Methods for Nanofiltration (NF) in Drinking Water Treatment Related with Organic Removal and Membrane Fouling Mitigation

Effect of Chemical Cleaning on Nanofiltration Process in Treating Surface Water

Low Flux Operation of Coagulation/Ultrafiltration System for Treatment of Beijiang River Source Water

Effect of operation conditions on fouling of immersed ultrafiltration membrane for drinking water treatment of surface water

Operation and Optimization of Ultrafiltration/Nanofiltration Hybrid Membrane Process

Effect of operation parameters on the flux stabilization of gravity-driven membrane (GDM) filtration system for decentralized water supply

Membrane fouling control and contaminant removal during direct nanofiltration of surface water

Performances comparison of reverse osmosis and nanofiltration application to defluorination from groundwater: Influence factors and fouling analysis

Effect of operational conditions on membrane permeability in a coagulation-microfiltration process for water purification.