Abstract:In this work, a high-energy ball mill technique is designed to deal with bulk precursors and achieve particle size minimization. A large amount of the nano-sized precursor is achieved in a narrow particle size distribution of ca. 95 nm. We confirm that the dimensional size of the precursor has a significant influence on the final LiFePO4 particle size and that small grains of the precursor probably form single-crystalline nanoparticles during the calcination process. After carbothermal reduction, the carbon-coated single-crystalline LiFePO4 nanocomposites (nano-CS–LFP) are easily synthesized. Benefiting from the decreasing particle size, the specific surface area of nano-CS–LFP is up to 48.0 m2 g−1, which implies a higher interfacial contact area between the active particles and the electrolyte, as well as an increase in its capacitance capability. Besides, cyclic voltammetry curves of nano-CS–LFP reveal a better capability of reversible reactivity and a lower polarization. Galvanostatic charge–discharge results exhibit excellent rate performance with a discharge capacity of ca. 100 mA h g−1 at 10 °C and a stable cycling property with a capacity retention of ca. 90% after 1000 cycles. In addition, the rapid charge–discharge test over 60 seconds indicates an excellent pulse performance with a high current in a short time period. The combination of the merits of carbon coating and particle size minimization is responsible for the above improvements. Finally, this facile preparation strategy is favorable for the industrial production of economical LiFePO4 materials from lab synthesis.

Synthesis of Nano-sized LiFePO4/C Coated Powder by Chemical Co-Precipitation Method

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of FePO4·xH2O for Fabricating Submicrometer Structured LiFePO4/C by a Co-Precipitation Method

Rapid Synthesis of LiFePO4 by Coprecipitation

Preparation of LiFePO4 Nanoparticles in Virtue of Triblock Copolymer P123 and Their Application in Li-ion Battery

SYNTHESIS AND CHARACTERIZATION OF <font>LiFePO</font><sub>4</sub>/<font>C</font> PREPARED VIA A SOL–GEL METHOD

Preparation of Nano-spherical Iron Phosphate by Hydrothermal Method and Its Application as the Precursor of Lithium Iron Phosphate

Effect of precursor FePO_4·2H_2O on electrochemical properties of LiFePO_4

Synthesis of Size-controllable LiFePO<sub>4</sub>/C Cathode Material by Controlled Crystallization

LiFePO4/C Nanocomposites Synthesized from Fe2O3 by a Hydrothermal Reaction-calcination Process and Their Electrochemical Performance

LiFePO4 prepared by carbothermal reduction method

The preparation and characterization of LiFe0.98Mn0.02PO4/C by spraydrying and low temperature reduction route

High Density LiFePO4/C Synthesized by Controlled Crystallization and Microwave Carbon Thermal Reduction

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

Study on the Electrochemical Performance of Carbon-Coated LiFePO4 Prepared by Sol-Gel Method

Synthesis of LiFePO<sub>4</sub>/C by Carbon Thermal Reduction Method and Its Electrochemical Properties

Synthesis Of Fepo4 Center Dot Xh(2)O For Fabricating Submicrometer Structured Lifepo4/C By A Co-Precipitation Method

Study on the Preparation of Lifepo4 by Hydrothermal Method

Carbon-coated Single-Crystalline LiFePO4 Nanocomposites for High-Power Li-ion Batteries: the Impact of Minimization of the Precursor Particle Size

LiFePO4 Crystal Growth During Co-precipitation

Preparation and characterization of LiFePO4 made from NH4FePO4 center dot H2O