Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Electrode Decoration and Photoelectron Recombination in Nanocrystalline TiO_2 Dye-Sensitized Solar Cells

ELECTRODE DECORATION AND PHOTOELECTRON COMBINATION EFFECT IN NANOCRYSTALLINE TITANIA SOLAR CELLS

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

TiO2 nanotube based dye-sensitized photoanode

New Development of Nanocrystalline TiO<inf>2</inf>-based Dye-Sensitized Solar Cells

Doped Titania Nanocrystalline Photoanodes for Efficiency Improvement of Dye-Sensitized Solar Cells

Effective Charge Collection in Dye-Sensitized Nanocrystalline TiO 2

COATING EFFECT OF TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELL

New Development Of Nanocrystalline Tio2-Based Dye-Sensitized Solar Cells

Kinetics of Electron Recombination of Dye-Sensitized Solar Cells Based on TiO2 Nanorod Arrays Sensitized with Different Dyes

Microstructure Design of Nanoporous TiO2Photoelectrodes for Dye-Sensitized Solar Cell Modules

Enhancing the photoelectric conversion of dye-sensitized solar cell via nitrogen-doped nanocrystalline titania electrode.

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Electron Transport in Dye-Sensitized Solar Cells Based on Tio2 Nanowires

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Light-scattering Photoanodes from Double-Layered Mesoporous TiO2 Nanoparticles/sio2 Nanospheres for Dye-Sensitized Solar Cells

Indirect Preparation of Titanium Dioxide Oxidation Plating Layer as Photoelectrode Used in Dye-Sensitized Solar Cells

Research Progress of Solid State Dye-sensitized TiO2 Nanocrystalline Thin Film Solar Cells

Design and Preparation of Nano-Electrodes for Dye-Sensitized Solar Cell

New Development Ofnanocrystalline Ti0 2-Based Dye-Sensitized Solar Cells