Abstract:To obtain cheap and environmentally friendly adsorbents, an attapulgite hydroxyapatite composite (HAA) was prepared via a co-precipitation method with attapulgite as the matrix. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were used for material characterization. The isothermal, thermodynamics, factors experiments (pH, anions), kinetics, and competitive adsorption were studied. The formation of Ca (II) and rate equation were used to explain the mechanism of adsorption and mechanism of anionic action. The data showed that the adsorption was well described by the Langmuir model and quasi-second-order kinetics model. Thermodynamic parameters (ΔH0 > 0, ΔS0 > 0, ΔG0 < −20 kJ/mol) suggested that the adsorption was an endothermic chemical adsorption process. Further analysis of the mechanism showed that ion exchange also contributed to the removal of Cd (II). Studies found that pH values <5 caused partial dissolution of HAA and high temperature was conducive to rapid adsorption. The F− and SO42− promoted adsorption by the precipitate with Ca (II), and Cl− hindered adsorption by complexation with Cd (II). The adsorption capacity of HAA was 3.70, 1.99, 1.17, 0.98 mmol/g for Pb (II), Cu (II), Cd (II), and Zn (II), respectively, indicated that HAA may be promising for composite materials to remove heavy metals from water.Hydroxyapatite attapulgite composites were prepared by a co-precipitation method. The SBET of Synthetic compounds was is 4- and 9-fold that of HA and A, respectively. What’s more, HAA removal efficiency and adsorption capacity that is significantly higher than A and HA under identical conditions. The study found that ion exchange and chemisorptions can explain the remove mechanism. But ion exchange with Ca (II) is the main factor. The F- and SO42- promoted adsorption by the precipitate with Ca (II) and rate equation were used to explain the mechanism of anionic action.

Study on the Adsorption Behavior of Attapulgite to Cadmium(ⅱ)and Nickel(ⅱ)and Its Analytical Application

Study on the application of attapulgite to determination of Cu(Ⅱ)and Pb(Ⅱ)in water samples

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Adsorption of Folic Acid Modified Attapulgite to Pb(II)

Removal of cadmium (II) from aqueous solution: A comparative study of raw attapulgite clay and a reusable waste-struvite/attapulgite obtained from nutrient-rich wastewater

Novel environmental-friendly nano-composite magnetic attapulgite functionalized by chitosan and EDTA for cadmium (II) removal

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

A comparative study of Cd(II) adsorption on calcined raw attapulgite and calcined aluminium hydroxide-modified attapulgites in aqueous solution

Arsenate and Cadmium Co-Adsorption and Co-Precipitation on Goethite

Removal of Cd(II) and Pb(II) from aqueous solution by modified attapulgite clay

The dynamics and adsorption of Cd (II) onto hydroxyapatite attapulgite composites from aqueous solution

Study on Adsorption Characteristics and Water Retention Properties of Attapulgite–Sodium Polyacrylate and Polyacrylamide to Trace Metal Cadmium Ion

Adsorption studies of cadmium onto magnetic Fe3O4@FePO4 and its preconcentration with detection by electrothermal atomic absorption spectrometry

Optimization of preparation parameters for environmentally friendly attapulgite functionalized by chitosan and its adsorption properties for Cd2+

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry.

Removal of Cd(II) from Aqueous Solution by Electrospun Nylon 6 Nanofibrous Nonwoven Containing Attapulgite

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Sorptive removal of cadmium using the attapulgite modified by the combination of calcination and iron

Cd(II) adsorption from aqueous solutions using modified attapulgite

Chemically Modified Activated Carbon With 1-Acylthiosemicarbazide For Selective Solid-Phase Extraction And Preconcentration Of Trace Cu(Ii), Hg(Ii) And Pb(Ii) From Water Samples