Studies on the Solubility Law of Cathode Ray Tube Frit

Heping LIU,Jinhui LI

DOI: https://doi.org/10.3321/j.issn:0253-2468.2006.03.018

2006-01-01

Abstract:Cathode ray tubes are the main component of electronic display equipment. A great deal of lead is used in cathode ray tube. The leaching of lead is over the threshold in Identification Standard for Hazardous Wastes of China. The key process of recycling cathode ray tubes is to separate leaded funnel and non-leaded panel glass. The funnel and panel after separating can be respectively used to re-manufacture new cathode ray tubes, to produce glasses, or to recover lead through smelting. Several physical and chemical approaches can be used to separate funnel and panel glass. The physical techniques identified for splitting cathode ray tubes include hot wire cutting, thermal shock, laser cutting, and water jet separation etc. The chemical techniques usually refer to acid dissolution. The physical techniques often result in incomplete separation of funnel and panel glass, and only cullet (not integrated funnel or panel) can be recycled to produce glasses or recover lead. The chemical techniques can avoid this defect of physical techniques and funnel and panel glass can be completely separated to re-manufacture new cathode ray tubes. Acid-thermal shock aided by ultrasonic is chosen therefore. The reaction law of frit in acid solution is studied and effect of nitric acid and acetic acid on frit is compared. It shows that nitric acid can dissolve frit faster than acetic acid, and the solvency of frit can be affected by the concentration of nitric acid and retarded by lead nitrate, zinc nitrate, barium nitrate and boric acid whose metal components exist in the frit.