Abstract:Integrating multiple hyperspectral linear-array cameras into a Linear-array Multi-camera System (LMS) enables an expanded Field of View (FOV) while preserving high spatial resolution. However, the constrained capabilities of tie points are weakened by the limited overlap and short baseline between sub-cameras, hindering the attainment of reliable solutions for the theoretically ideal relative calibration model. Additionally, the absence of stereoscopic imaging in the LMS introduces the challenge of acquiring dense Ground Control Points (GCPs) throughout the FOV during calibration. In this paper, for calibrating an advanced airborne hyperspectral LMS named Arial Hyperspectral System-1000 (AHS-1000), we propose an equivalent geometric model that transforms the three-camera configuration of the LMS into a single-camera representation on the master camera's focal plane, which was successfully applied to the data processing system of AHS-1000. We extracted dense GCPs by matching each Level-1 sub-image of the LMS with the bundled images of an existing three-line-scanner aerial image dataset, whose orientation parameters have been accurately solved by bundle adjustment with sparse GCPs; the matched points of each sub-image were consistently projected onto the master focal plane as image observations for our equivalent model. Finally, we established a collinearity equation system and performed a combined strip adjustment to calibrate the distortion terms for each pixel of the equivalent camera. The results demonstrate the effectiveness and robustness of our equivalent modeling method, which outperforms the classic modeling method by 2.83 pixels in interior accuracy and 0.86 pixels in relative accuracy, as well as outperforming another similar equivalent modeling method by 1.22 pixels in interior accuracy and 0.18 pixels in relative accuracy. Additionally, our comparison utilizing bundled images, public DOM (Digital Orthophoto Maps) /DEM (Digital Elevation Models), and high-precision DOM/DEM from aerial three-line-scanner demonstrates that bundled images can achieve higher calibration accuracy.

Design and Calibration for Digital Backing System of Twice-imaging Aviation Camera

Twice-imaging airborne camera system with distributed sensors

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

A Method Of Autofocus For Remote Sensing Camera

Spatiotemporal Decoupling Based LiDAR-Camera Calibration under Arbitrary Configurations.

Intrinsic and Extrinsic Calibration of Roadside LiDAR and Camera

A Long-focus Camera and Telemetry LiDAR Calibration for Rapid Transit Equipment.

Data Processing Method of Time-of-flight 3D Imaging Camera

GEOMETRIC AND AUTOMATIC MOSAIC METHOD WITH COLLINEAR EQUATION FOR AVIATION TWICE-IMAGING DATA

A Novel Camera Calibration Method Based on Multiple Calibration Planes

Automatic Calibration Between Multi-Lines LiDAR and Visible Light Camera Based on Edge Refinement and Virtual Mask Matching

3-D Positioning System Based on Linear CCD Camera

Radiative Transfer Modeling and Monte Carlo Simulating of a New Digital Airborne Camera

A Convertible Aerial Camera System Integrated with Film and Ccd Image Sensor

Effective camera calibration in free-viewpoint systems

A Self-Calibrated Photo-Geometric Depth Camera

Calibrating an airborne linear-array multi-camera system on the master focal plane with existing bundled images

Improvement of Two-step Calibration Method in Machine Vision

A Spliced Satellite Optical Camera Geometric Calibration Method Based on Inter-Chip Geometry Constraints

On-Orbit Geometric Calibration and Accuracy Validation of the Jilin1-KF01B Wide-Field Camera

Camera Self-Calibration with GNSS Constrained Bundle Adjustment for Weakly Structured Long Corridor UAV Images