Abstract:Sandwich structures and porous materials have been applied widely in various fields due to their excellent mechanical performance, and multifunctional composites will have a significant engineering demand in the future. Studying damped composites' mechanical properties and failure forms has significant engineering value and significance. However, the current connecting processes for sandwich panels and porous materials must be improved. Therefore, to explore the ambiguity of the connection interface between the core material and panel in sandwich panels, as well as the mechanical properties of such structures, a sandwich panel with a metal rubber core material was prepared using vacuum brazing and cementing processes. Microscopic examinations using scanning electron microscopy and energy-dispersive spectroscopy were conducted to observe the physical bonding mechanism at the interface of the sandwich panel. The results indicate that the brazed sandwich panels exhibited a more uniform and continuous interface than the cemented sandwich panels. This work designs three-point bending compression experiments to investigate the effects of core material thickness, density, and preparation process on the bending mechanical properties of the sandwich panel. Failure modes of the sandwich panel during the experiments are analyzed. The experimental results show that the failures of the brazed sandwich panels are attributable to the bending deformation of the panel and the shear failure of the metal wire core material. The cemented sandwich panels exhibit separation failures in the area below the indenter and at both ends of the panel. The core material's thickness and density significantly influence the bending performance of the sandwich panels. An increase in the core material's thickness and density effectively enhances the sandwich panels' peak load and energy absorption capacity.

Bending and dynamic analyses of sandwich panels considering the size effect of sandwich core

A novel computational framework for exact stress analysis and bending behavior of sandwich panels with non-homogeneous cores

Bending and Buckling of Circular Sandwich Plates with a Hardened Core

Mechanics of sandwich panels with a buckling-dominated lattice core: The effects of the initial rod curvatures

Large deflection behavior of circular sandwich plates with metal foam-core

Quasi-static three-point bending of sandwich panels with Miura-ori cores

Buckling of axially loaded sandwich composite panels with reinforced calcium silicate faces and polyurethane cores

Accurate thermomechanical analysis of sandwich beams with nonhomogeneous core by quadrature element method

A finite element model for analyzing curved surface sandwich panel forming

Study on Calculation Method of Bending Performance of Concrete Sandwich Composite Slab

Dynamic response of multilayer sandwich beams with foam-filled trapezoidal corrugated and foam cores under low-velocity impact

Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load

Multi-objective optimization design of a new non-uniform rectangular honeycomb sandwich panel

Experimental investigations into the dynamic response of sandwich panels with multi-layered corrugated cores subjected to underwater impulsive load

Analysis of effect of variation of Honeycomb core cell size and sandwich panel width on the stiffness of a sandwich structure

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

Experimental Investigation of the Three-Point Bending Property of a Sandwich Panel with a Metal Rubber Core

Multi-point forming of sandwich panels with egg-box-like cores and failure behaviors in forming process: Analytical models, numerical and experimental investigations

Analytical and numerical analysis on local and global buckling of sandwich panels with strut-based lattice cores

A layerwise/solid-element method of the linear static and free vibration analysis for the composite sandwich plates