Abstract:Sandwich structures are susceptible to wrinkling when subject to in-plane compressive loads, which threatens structural safety. To accurately investigate the failure behavior, the following work is to be required. Firstly, the wrinkling behavior of sandwich plates is a typical three-dimensional (3D) issue. To consider a 3D effect, an enhanced higher-order finite element formulation including transverse normal strain has been proposed for the first time. Utilizing the proposed finite element formulation, a refined quadrilateral element model has been constructed. Secondly, the buckling and wrinkling behaviors of square sandwich plates have been investigated. The performance of the proposed model has been evaluated by comparing it with the quasi-3D solutions, the results obtained from the 3D finite element method (3D-FEM), and other models. The differences between the buckling and wrinkling failure behaviors have been carefully explained. Thirdly, the effects of boundary conditions on buckling and wrinkling deformation have been explored in detail. By utilizing the proposed model, the translation mechanism between the buckling and wrinkling deformations of sandwich plates under different boundary conditions has been revealed, which can help other investigators to well understand the buckling and wrinkling behaviors of sandwich plates. It can be shown that the wrinkling behaviors of thick sandwich plates occur earlier than the buckling behaviors when the thickness ratio of core to face panel is more than 35. Besides, it also can be shown that the buckling and wrinkling loads decrease gradually with the relaxation of the boundary restriction.

Buckling of axially loaded sandwich composite panels with reinforced calcium silicate faces and polyurethane cores

Buckling Analysis of Hybrid Fiber‐reinforced Composite Sandwich Panels with Varying Numbers of Polyurethane Cores

Analysis of Buckling Failure Modes of Composite Sandwich Panels Filled with Aluminum Foam

Bending Properties of Steel Faced Sandwich Composite Panels with Phenolic Foam Cores

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method

Mechanics of sandwich panels with a buckling-dominated lattice core: The effects of the initial rod curvatures

Experimental and Numerical Investigation on the Crushing Behavior of Sandwich Composite under Edgewise Compression Loading

Three-Dimensional Finite Element Buckling Analysis of Honeycomb Sandwich Composite Shells with Cutouts

Finite Element Analysis of Sandwich Overall Buckling and Wrinkling

Analysis and experimental evaluation framework for buckling and post-buckling of composite stiffened panels

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

Experiment and Analysis of Hat-Stringer-stiffened Composite Curved Panels under Axial Compression

Mechanical Behavior of Sandwich Panels with Hollow Al-Si Tubes Core Construction

Buckling of carbon fiber composite pyramidal truss core sandwich columns

Bending and Buckling of Circular Sandwich Plates with a Hardened Core

The Lateral Compressive Buckling Performance of Aluminum Honeycomb Panels for Long-Span Hollow Core Roofs

Nonlinear local response of foam-filled sandwich plates with laminated faces under combined transverse and in-plane loads

Study on Calculation Method of Bending Performance of Concrete Sandwich Composite Slab

Buckling of honeycomb sandwich structures with cutouts and reinforcements

Analysis and Parametric Study of Partially Composite Precast Concrete Sandwich Panels under Axial Loads

The Load-Carrying Capacity of Sandwich Beams in Different Collapse Mechanisms