Abstract:The partially sulfonated polystyrene (SPS) is a very simple and easily prepared material. In this work, SPS was used for the first time as a macromolecular compatibilizer to improve the compatibilization of high-impact polystyrene (HIPS)/magnesium hydroxide (MH) composites by self-compatibilization technology. The compatibilization effects of SPS were systematically studied by mechanical performance tests, limiting oxygen index (LOI) measurements, thermal stability analyses, and scanning electron microscopy (SEM) observation. On the basis of these experimental results, SPS was proven efficient to enhance the compatibilization of the HIPS/MH composites due to the coupling effects. The sulfonic groups of SPS could anchor onto the surface of MH particles through interaction with hydroxyl groups of M-I. Meanwhile, the long alkyl chains of SPS readily entwisted with HIPS matrix. Besides, the effects of both the sulfonation degree and the content of SPS on the performance of HIPS/MH composites were investigated also. In order to obtain the best overall final performance, both of the aforementioned parameters should be controlled in a suitable range. The optimal condition in this study was 3-4.5 wt % of SPS with sulfonation degree of 24.8-35.5% in the composites. Furthermore, compared with styrene-butadiene-styrene block copolymer (SBS), a commercial compatibilizer widely used in HIPS materials, SPS exhibited better compatibilization effects but lower cost. Therefore, it could be concluded that SPS was applicable as a cost-effective compatibilizer in HIPS/MH composites.

Syndiotactic polystyrene-b-atactic polypropylene block copolymer alloy as a compatibilizer for syndiotactic polystyrene/isotactic polypropylene blends

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

THE COMPATIBILITY OF SYNDIOTACTIC POLYSTYRENE/ISOTACTIC POLYPROPYLENE/SYNDIOTACTIC POLYSTYRENE-b-POLY(1-BUTENE) BLENDS

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology

Improvement of the Compatibilization of High-Impact Polystyrene/Magnesium Hydroxide Composites with Partially Sulfonated Polystyrene As Macromolecular Compatibilizers

Compatibilization by Sulfonate Ionomers in Polyblends with Thermotropic Liquid Crystalline Polymers

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

The Morphology and Mechanical Properties of Sps/ipp Blends

Thermal behaviors of syndiopolystyrene/isotactic polypropylene blends

Blends of Syndiotactic Polystyrene and Isotactic Polypropene Prepared Using a Ziegler‐Natta Catalyst Containing a Novel Donor

Preparation of Polypropylene and Polystyrene with NCO and NH2 Functional Groups and Their Applications in Polypropylene/polystyrene Blends

Effect of Poly(styrene-ran-methyl acrylate) Inclusion on the Compatibility of Polylactide/Polystyrene-b-Polybutadiene-b-Polystyrene Blends Characterized by Morphological, Thermal, Rheological, and Mechanical Measurements

Effects Of Styrene-Ethylene/Propylene Diblock Copolymer (Sep) On The Compatibilization Of Pp/Ps Blends

Compatibilization of poly(lactic acid)/high impact polystyrene interface using copolymer poly(stylene-ran-methyl acrylate)

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Preparation Of Polypropylene/Acrylonitrile-Styrene Copolymer Alloys By One-Step Reactive Blending

Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene/Polystyrene Blends

Sequential Mesoscale Approach for Determining the Effects of the Addition of A Block Copolymer Compatibilizer on the Mechanical Properties of Polymer Blends