Abstract:In this study, tailored polyethylene reactor blends with the in situ embedding of a weakly entangled ultra-high-molecular weight polyethylene (UHMWPE) were synthesized by the polyhedral oligomeric silsesquioxane modified Ziegler-Natta (ZN) catalysts using a two-stage cascade polymerization technique. Holistic improvement of strength/stiffness/toughness was realized by the common injection modeling owing to the enhanced formation of an orientated structure which was verified by the patterns of two-dimensional (2D) small-angle X-ray scattering and 2D wide-angle X-ray diffraction, as well as the fracture morphology. 30 wt % of the less entangled UHMWPE was successfully incorporated into the high-density polyethylene (HDPE) matrix to achieve a synchronously increased tensile strength (52.4 MPa, +97.7%), Young's modulus (604.2 MPa, +43.6%), and impact resistance (74.4 kJ/m2, +675%), compared with those of the benchmarked HDPE. However, dissipation of a shish-kebab structure was pronounced in the depth direction of the HDPE spline reinforced with the disentangled UHMWPE. This dissipation was proved to partially sacrifice the strength and stiffness. Importantly, the impact strength is greatly enhanced (+140%) due to the cocrystallization effect of the disentangled linear UHMWPE chains with the HDPE matrix. The HDPE matrix reinforced with the weakly entangled UHMWPE presents wider gradient distribution and orientation degree distribution of oriented structures (including shish-kebab and stacked lamella) along the depth direction. Thus, the balance of strength/stiffness/toughness was synergistically improved with the wider gradient distribution of oriented structures. This in situ polymerization method with the weakly entangled UHMWPE offers a promising routine for achieving the high-performance polyethylene commodity.

A Mandrel‐rotating Die to Produce High‐hoop‐strength HDPE Pipe by Self‐reinforcement

Design of a Large Diameter Steel Reinforced Plastic Pipe

Enhanced effect of thermal expansion process in rotational shear technology for high performance HDPE pipes

Shape Memory Polymer S-shaped Mandrel for Composite Air Duct Manufacturing

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Biaxial reinforcements for polyethylene medical-tubes via helical convergent flow

Role of Melt Plasticizing Temperature in Morphology and Properties of PE100 Pipes Prepared by a Rotational Shear System

Melt Processing and Structural Manipulation of Highly Linear Disentangled Ultrahigh Molecular Weight Polyethylene

Towards high-performance all-polyethylene materials by a two-step processing strategy using two-roll mill

The effect of high-temperature annealing on thermal properties and morphology of polyethylene pipes prepared by rotational shear

Effect of mandrel rotation speed on morphology and mechanical properties of polypropylene pipes produced by rotational shear

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

The effect of annealing time on morphology, mechanical properties, and thermal conductivity of HDPE pipes produced by rotational shear

Reinforcing High-Density Polyethylene by Polyacrylonitrile Fibers

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Development of High-Density-Polyethylene-Based Thick Multi-Reducer Injection Mold Incorporating Cooling Analysis Technology

Preparation and characterization of long-chain branched HDPE by UV-induced reactive extrusion at mild temperature

Mechanical and Processing Enhancement of a Recycled HDPE/PPR-Based Double-Wall Corrugated Pipe via a POE- g -MAH/CaCO 3 /HDPE Polymer Composite

The role of expansion angle and speed on shish-kebab formation in expansion pipe extruder head explored by high temperature rapid stretch