Enhanced removal of contaminant using the biological film, anoxic–anaerobic–aerobic and electro-coagulation process applied to high-load sewage treatment
Wenlong Wang,Shaohua Chen,Keqian Bao,Jingqing Gao,Ruiqin Zhang,Zhenya Zhang,Norio Sugiura
DOI: https://doi.org/10.1080/09593330.2013.852628
IF: 3.475
2013-11-01
Environmental Technology
Abstract:In order to explore a new treatment process applying to decentralized domestic sewage treatment, and enhance removal of total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD), a novel system integrating anoxic-anaerobic-aerobic (reversed A2O) and electro-coagulation (EC) process was studied, and complex biological media (CMB) was used as suspended carrier for biofilm development. In this work, TN, TP and COD removal performance were investigated with consideration of three major factors, hydraulic retention time (HRT), organic loading rate (OLR) and sludge recycle ratio (SRR). Results showed that (1) The optimum HRT was between 8 and 12 h. The removal efficiencies of TN, TP and COD were about 68%, 95% and 95%, respectively. (2) With the increase of OLR, the removal efficiency of TN increased slowly. But it increased first and then declined for COD and TP removal. Their maximum were attained when OLR was 1.8 g(COD)/(L d), and they were 96% and 93%, respectively. (3) The optimum SRR was 75%. The COD, TN and TP removal efficiencies were about 95%, 72% and 98%, respectively. In this system, the maximum TN and COD removal were achieved in anoxic tank, but it was achieved in aerobic tank for TP removal. The EC bed enhanced the effluent quality, especially the efficiency in advanced P removal. From these results, it was concluded that the new process could be a reliable option for providing excellent effluent quality.
environmental sciences