Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Effect of electrode configuration and voltage variations on electrocoagulation process in surfactant removal from laundry wastewater

Treatment of textile industry wastewater by electrocoagulation technology

Optimization of iron electrocoagulation parameters for enhanced turbidity and chemical oxygen demand removal from laundry greywater

Combined Coagulation-Electrocoagulation Treatment of Urban, Peri-urban, and Textile Wastewaters: Process Evaluation and Sludge Setting Characteristics

Removal of textile pollutants by electrocoagulation using all bipolar and monopolar connection mode of iron and aluminum composite electrodes

Identification, removal of microplastics and surfactants from laundry wastewater using electrocoagulation method

Implications of advanced wastewater treatment: Electrocoagulation and electroflocculation of effluent discharged from a wastewater treatment plant

Investigation on operating parameters and cost using an electrocoagulation process for wastewater treatment

Effect of current density on COD removal efficiency for wastewater using the electrocoagulation process

Recent Applications of the Electrocoagulation Process on Agro-Based Industrial Wastewater: A Review

Assessment of electrocoagulation for the treatment of petroleum refinery wastewater

Removal Efficiency of Electrocoagulation Treatment Using Aluminium Electrode for Stabilized Leachate

Treatment of contaminated river water by batch electrocoagulation system using aluminium and iron electrodes: Performance of process and statistical analysis

Enhancing lead ion removal from simulated wastewater through continuous electrocoagulation process: investigating operating parameters and adsorption behavior

CHEMICAL COAGULATION AND ELECTROCOAGULATION IN TREATMENT TECHNOLOGY FOR ENVIRONMENTAL GREEN COMMUNITY

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Treatment and reprocessing of textile dyeing wastewater by using the electrocoagulation treatment process

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Behaviors and Mechanism of Color, COD, and Silica Removals in the Electrocoagulation of Batik Wastewater Using Waste Aluminum Electrodes

Separation of Chromium(VI) Metal in Wastewater Using Electrocoagulation Method with NaCl Coagulant

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes