Abstract:Tensile machine is a very sophisticated test equipment, which can test the mechanical properties of some materials. In the drawing machine, the clamping device is to prevent the relative displacement and vibration phenomenon in the process of tensile test. The clamping device is the most important part of the structure of the test machine, and the main task of the clamping device is to control the degree of freedom of the specimen needs to be clamped, so as to further add loads to the various specimens to be held, and finally complete the mechanical property test of the material. But at present, the existing fixture mechanism is mainly hydraulic, pneumatic, mechanical fixture. At present, the existing mechanical fixture still has bending stress during the clamping process, which will affect the accuracy of the experiment. Therefore, a clamping mechanism with adjustable clamping force and flat pushing is designed. An electric control type fixture mechanism is very rare, so in this paper, an electrically controlled fixture is designed on this basis. The main contents are as follows: (1) On the basis of the existing fixture types, the working mode of the fixture is studied, and the working principle related to the fixture is mastered. (2) The main components of the fixture mechanism are analysed, the design scheme is determined, and the selection of the components of the drive part and the selection of the related components within the fixture mechanism is completed. ( 3) The force analysis of the main body of the fixture is carried out by using theoretical mechanics knowledge, and the relevant calculations are completed. The solid modeling of the whole mechanism is completed by using SolidWorks. The force analysis of key parts is carried out by using ANSYS software, and the correctness and safety of material selection and design are verified. The main parts of the fixture mechanism to complete the corresponding force analysis, and the theoretical calculation results are compared and verified, and finally realize the electric control of the fixture mechanism and complete the design of the fixture mechanism.

Design of Fixture for Airborne Equipment in Vibration Test

Analysis on Dynamic Characteristics and Design of Centrifuge

Research on Redress System of Vibration Table in Multi-Parameter Combined Environment Test System

Study on Fluid-Solid Coupling Dynamic Characteristics of Large Wide-Frequency-range Underwater Vibration Tables

Vibration characteristics and isolation in vibration-sensitive areas under moving vehicle load

Study and Establishment of the National Standard of the Ultra-low frequency Vibration

Design and Implementation of Vibration Test Control System of Multi-Exciter Synchronization

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

An Adaptive Posture Following and Keeping Fixture and Experiments

Design and validation of dynamic characteristics of vibration of test fixture for automobile application

Structural Design and Analysis of an Airborne Equipment

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Design of Multi-functional Test Bench for Torsional Vibration and Fault Simulations of Rotors

Research on angular vibration measurement system based on heterodyne interference

Study of Thin-plate Specimen Fixture of High-frequency Fatigue Testing Machine

An Adaptive Fixture for Suppress Vibrations and Measuring Workpiece Deformation of Thin-Walled Casings

Vibration and Aerodynamic Analysis and Optimization Design of a Test Centrifuge

Design of fixture for ultrasonic assisted gas tungsten arc welding using an integrated approach

Development and testing of a novel vibratory compaction instrument considering its natural frequency

Dynamic Simulation Analysis of the Mid-Strain-Rate Tensile Testing Machine

Design and Research of Intelligent Fixture for Drawing Machine