Abstract:Highly conducting $SnO_{2}$ thin films were prepared by chemical spray pyrolysis technique. One set of as-deposited films were annealed in air for 2 h at 850$^{o}$C. These as-deposited and annealed films were irradiated using $Au^{9+}$ ions with energy of 120 MeV at different fluences ranging from $1\times10^{11}$ to $3\times10^{13}$ $ions/cm^{2}$. Electrical measurement shows that as-deposited $SnO_{2}$ films are in conducting state with n = $3.164 \times 10^{20}$ $cm^{-3}$ and annealed $SnO_{2}$ films are in insulating state. The amorphized latent tracks are created only above a certain threshold value of $S_{e}$, which directly depends on the free electron concentration (n). The electronic energy loss ($S_{e}$) of 120 MeV $Au^{9+}$ ions in $SnO_{2}$ is greater than the threshold energy loss ($S_{eth}$) required for the latent track formation in annealed $SnO_{2}$ thin film, but is less than $S_{eth}$ required for as-deposited $SnO_{2}$ film. Therefore, the latent tracks are formed in the annealed $SnO_{2}$ film and not in the as-deposited $SnO_{2}$ film. Thermal spike model is used for the calculation of threshold energy loss and radius of melted zone. The possible mechanism of the structural changes and surface microstructure evolutions is briefly discussed in the light of ion's energy relaxation processes and target's conductivity. The atomic force microscopy (AFM) study of films shows that the morphologies of irradiated films are linked with carrier concentration of target materials.

Ion-bombardment-enhanced Diffusion Phenomenon in Pb-Sn Alloy

SPUTTERING RELATED PHENOMENA ON THE SURFACE OF Pb97.4Sn2.6 ALLOY

Study of ion sputtering on AlxSn100-x alloy system

SPUTTERING RESEARCH OF Al-50wt％Sn ALLOY

Role of Carrier Concentration in Swift Heavy Ion Irradiation Induced Surface Modifications

The impact of high current pulses electron beam on the microstructure and surface properties of Sn/Al system

Surface Modification of Ni3al-Based Alloy Ic6 with Intense Pulsed Ion Beams

Irradiation effects of intense pulsed ion beam on the surface of NiAl alloy

Influences of the Irradiation of Intense Pulsed Ion Beam (IPIB) on the Surface of Ni₃Al Base Alloy IC6

Surface Alloying Effects in the Growth of Au on Pb(111) Thin Film

Segregation Effect on Surface Composition in Alloy Sputtering

Quantum Size Effect on Adatom Surface Diffusion

Atomic scale investigation of interfacial damage initiation in SnPb alloy: structural stability and defect-interface interactions

Electrical characterization of Ar-ion-bombardment-induced damage in Au/Si and PtSi/Si Schottky barrier contacts

Silver Diffusion In A Nanometer Ni-B-O Amorphous Alloy

Use of an energetic ion beam on the surface during physical vapor deposition

Irradiation effects in the Ni-17Mo-7Cr alloy bombarded with MeV Au ions

Long range interactions between micro spheres and alloy surfaces in water changed by ion implantation

Effect of Au-ion irradiation on the morphology, microstructure and lead-bismuth eutectic corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating

Diffusion Of Silver In Nanometer Ni-B Amorphous Alloy

Spreading Dynamics and Interfacial Characteristics of Sn-3.0Ag-0.5Cu-xBi Melting on Cu Substrates