Abstract:Robotic fiber placement systems, which have larger workspaces, better dexterity, and easier installations, are less expensive alternatives to the conventional fiber placement machines. To overcome the disadvantage of poor path accuracy, sensor-based path correction can be implemented online by reference to the edge of a previously deposited tow or a guide line on the tooling surface. In fiber placement operations, the end-effector with a compaction roller, acting like a unicycle on the surface, is subject to the nonholonomic constraints when moving along a predefined path to provide proper guidance and pressure for the tows. If the constraints are ignored in path correction, the corrective motion with a lateral velocity component will result in improper tow guidance that induces undesired and uncontrolled tow steering, leading to deviations and wrinkles. In this paper, the nonholonomic constraints of the robot end point is discussed for the first time in online path correction, and a novel method is proposed under the constraints to achieve online path correction without damaging lay-up quality. The path correction problem is analyzed and simplified using twist decomposition. Then the instantaneous motion of the roller is derived by modified vector pursuit algorithm. Afterwards, an iterative algorithm is proposed based on screw theory and differential kinematics for consecutive external control of correction in robot joint space. The implementation of the method is tentatively explored by applying visual sensing based on directional light source and external control to a robotic fiber placement system. Simulations and experiments have showed that the large initial path deviations can be effectively reduced and the roller motions along the corrected paths satisfy the nonholonomic constraints.

Variable-Angles Trajectory Planning Algorithm of Automated Fiber Placement for Conical Shell

Variable-Angle Trajectory Planning Algorithm for Automated Fiber Placement of Two Non-developable Surfaces

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Two-Stage Sector Partition Path Planning Method For Automated Fiber Placement On Complex Surfaces

A Path Planning Algorithm of Closed Surface for Fiber Placement

An Improved Path Discretization Method for Automated Fiber Placement

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Mechanism for Wrapping Fiber Around the Y Fork

Path Planning Algorithm for Fiber Placement Based on Boundaries of Tow

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Path Planning and Optimization Algorithm for Fiber Placement of S-shaped Inlet

Trajectory Planning of Robot Considering Variation of Convergence Zone Length in Circular Braiding System

Quaternion-based Placement Orientation Trajectory Smoothing Method under the Domain of Admissible Orientation

Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation

Determination and application of posture adjustable domain under constraints of placement quality

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

Post Processing Technology for Fiber Placement Machine of Manipulator Terminal Motion Trajectory

Curvature-controlled Trajectory Planning for Variable Stiffness Composite Laminates

Research on fiber placement machine and path planning methodology