Abstract:We have presented herein the results of microstructure, surface magnetic domains (SMDs), and giant magneto-impedance (GMI) effect of melt-extracted Co68.15Fe4.35Si12.25B11.25Nb2Cu2 amorphous wires for the first time employed by using a cryogenic Joule annealing (CJA) technique with large DC current amplitude. Compared with the conventional JA method, experimental results indicate that the maximum GMI ratio [Delta Z/Z(0)](max) achieves up to 425% at 8.1 MHz with monotonic increase of the axial magnetic field H-ex up to 6.5 Oe for 300 mA (equal to around 1.06 x 10(6) A/dm(-2)) CJA-ed wire, which is about 75% larger than the [Delta Z/Z(0)](max) for the 100 mA (nearly 3.53 x 10(5) A/dm(-2)) JA-ed microwires. The remarkable features of large and linearly sensitive response field (2.5 similar to 6.5 Oe) and the sensitivity of 99.4%/Oe with higher GMI ratio simultaneously make the CJA tailored melt-extracted microwires promising candidate materials for miniaturized GMI sensors. Another interesting result of GMI profiles of 200 mA (appropriately equal to 7.07 x 10(5) A/dm(-2)) CJA-ed wire show a linear response to H-ex (ranging from 10 to 80 Oe or more), this behavior of GMI curves can be explored to fabricate bi-sensor. Large response field proves to originate from the intensive coupling between the radial stress field and the circumferential magnetic field during CJA process. The effect of outer-shell microstructure and complex SMD for 300 mA CJA-ed microwire is attributed to the fact that liquid nitrogen hinders the evolution of circumferential domain structure to some extent and protects the amorphous structure in the shell region. (C) 2014 AIP Publishing LLC.

Modeling and Numerical Calculation of Asymmetrical Giant Magneto-Impedance Effect of Ribbons

Sensing mechanism modeling of off-diagonal asymmetric giant magnetoimpedance effect in ribbons

Analysis of Influence of A C Current Intensity on Time-Domain Sensing Properties of Amorphous Ribbon AGMI Sensor

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Design and characteristic analysis of giant magnetoimpedance sensor in Fe-based nanocrystalline ribbons

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

NUMERICAL STUDY ON GIANT MAGNETO IMPEDANCE EFFECTS IN SOFT MAGNETIC RIBBONS

Feedback-type giant magneto-impedance sensor based on longitudinal excitation

A Theoretical Model Based on Domain Transition Structure for Transition Gmi Behavior in High Frequency

Ultra-large Giant Magnetoimpedance Effect by a 2D Square Spiral Amorphous Microwire

Exploring Stress-Dependent Impedance Behavior Via Magnetization Dynamics in Amorphous Magnetic Fibers in High Frequency: Experimental and Modeling

Length Effect on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Comparison of magnetoimpedance behaviors in meander CoFeNiSiB amorphous ribbon for deformation sensing applications

Magnetoimpedance Effect in Cobalt-Based Amorphous Ribbons with an Inhomogeneous Magnetic Structure

From magneto-elastic impedance model to accurate magneto-mechanical coefficient measurements

Magnetoelectric Coupling In Multiferroic Laminated Plates With Giant Magnetostrictive Material Layers

Magneto-Impedance In Fe73.5cu1mo3si13.5b9 Alloy Ribbons

Magnetic interactions and magnetoimpedance effect in FINEMET/SiO2/FePt composite ribbons