Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Research progress in new hydrogen storage material AlH_3

Synthesis and Stability of Hydrogen Storage Material Aluminum Hydride

Aluminum hydride for solid-state hydrogen storage: Structure, synthesis, thermodynamics, kinetics, and regeneration

AlH3 as a hydrogen storage material: recent advances, prospects and challenges

Progress in Improving Thermodynamics and Kinetics of New Hydrogen Storage Materials

Thermodynamics Study of Hydrogen Storage Materials

New Progress in the Study of Novel Hydrogen Storage Materials

Wet Chemical Synthesis of Non-solvated Rod-Like Α'-Alh3 As a Hydrogen Storage Material.

Aluminum hydride as a hydrogen and energy storage material: Past, present and future

Investigation on reversible hydrogen storage properties of Li3AlH6/2LiNH2 composite

Advanced preparation and processing techniques for high energy fuel AlH3

Hydrogen Desorption Behaviors of Γ-Alh 3 : Diverse Decomposition Mechanisms for the Outer Layer and the Inner Part of Γ-Alh 3 Particle

Hydrogen Storage Properties of LiBH4–Li3AlH6 Composites

AlH3 As High-Energy Fuels for Solid Propellants: Synthesis, Thermodynamics, Kinetics, and Stabilization

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Synthesis and Hydrogen Desorption Properties of Nanoscale α-AlH 3

Hydrogen desorption properties of the MgH2-AlH3 composites

Research progress of TiFe-based hydrogen storage alloys

Dehydriding properties of γ-AlH3

On the Effect of Different Sources of Al on the Properties of LiBH4 Hydrogen Storage