Abstract:The Cyclic CO2 capture and CaCO3 regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO2 capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that file CO2 in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO2 capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO2 capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO2 capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles.

Experimental Study of the Absorption Intensified Type Water-gas Conversion Reaction Based on a Calcium-base Absorbent

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

A basic study on the nano CaO-based CO2 adsorbents in FFB for CO2 capture

Study on the kinetics of Ca-based CO2 sorbent of carbonation and calcination for adsorption enhanced reforming process

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent

Experimental Investigation on Sulfur Transformation During Coal Steam Gasification with Ca-based Absorbent

EXPERIMENTAL INVESTIGATION ON IMPROVING THE CALCIUM CONVERSION RATE OF ABSORBENT BY STEAM

High-Temperature Attrition of Nano CaO-Based CO2-Reactive Adsorbents in the Calcium Looping Process

The Gasification of Wet Biomass Using Ca(OH)2 As CO2 Absorbent: the Microstructure of Char and Absorbent

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Experimental study of steam activation of calcium-based sorbents for dry-scrubbing dechlorinate

Experimental Analysis and Evaluation on the CO2 Adsorption Performance of Modified CaO-based Adsorbents Doped with High Aluminum Cement in Different Reactors

Experimental Research on CaO Carbonation/Calcination Cycles in Fluidized Bed

Effect of Heating-Rate on Ca-based Absorbent Performance of CO2 Capture

MECHANISM OF IMPROVING THE MEDIUM TEMPERATURE FGD PROCESS BY REACTIVATING SORBENTS BY STEAM

Reactivation of calcium-based sorbent by water hydration for CO2 capture

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Utilizing Limestone Alone for Integrated CO2 Capture and Reverse Water-Gas Reaction in a Fixed Bed Reactor: Employing Mass and Gas Signal Analysis

Experiments and DFT study on modified CaO-based adsorbents for enhanced CO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mrow /> <mml:mn>2</mml:mn> </mml:msub></mml:math> capture