Abstract:Although oceans play a key role in the global selenium (Se) cycle, there is currently very little quantitative information available on the distribution of Se concentrations and Se speciation in marine environments. In general, determining Se concentration and speciation in seawater is highly challenging due to very low Se levels ((sub)ng⋅L-1), whereas matrix elements interfering Se pre-concentration and detection are up to the g⋅L-1 levels. In this study, we established a sensitive method for the determination of the various Se chemical fractions present in natural seawater, i.e. selenite (SeIV), selenate (SeVI), organic Se-II + Se0 and total Se, using species-specific isotope dilution gas chromatography coupled to inductively coupled plasma mass spectrometry (ID-GC-ICP-MS). We compared different derivatization reagents and optimized specific pre-treatment protocols, including a microwave assisted oxidation protocol for the determination of total Se and organic Se-II + Se0 using H2O2. To increase sensitivity, we developed an online pre-concentration method based on large volume injection (LVI) using a programmed temperature vaporization (PTV) inlet. Eventually, the developed method achieved low absolute and methodological detection limits, i.e., respectively, 0.1-0.3 pg and 0.9-3.1 ng.L-1 for the different fractions. The accuracy of our method was of 2% for a certified reference material (CRM) diluted in artificial seawater while the precision was better than 4% for a freshwater CRM in artificial seawater matrix as well as two common seawater CRMs certified for trace elements excluding Se. As a proof-of-concept, we quantified the various Se fractions in a large number of natural water samples from the Baltic and North Seas, encompassing a wide range of salinity (7-35 psu), which shows that its detection limits are sufficient to determine total Se, SeIV, SeVI and organic Se-II + Se0 concentrations in brackish and marine systems.

Direct Speciation of Selenite and Selenate with Thermospray Sample Introduction Methods

Nanosemiconductor-based photocatalytic vapor generation systems for subsequent selenium determination and speciation with atomic fluorescence spectrometry and inductively coupled plasma mass spectrometry

Speciation of inorganic selenium in natural water by in situ solid-phase extraction using functionalized silica

Stability of selenium and its speciation analysis in water using automatic system separation and HR-ICP-MS measurement

Speciation of Six Arsenic Compounds Using High-Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectrometry with Sample Introduction by Thermospray Nebulization

Alkaline fusion-alkaline mode HG-ICP spectrometry for selenium determination

On-line Organoselenium Interference Removal for Inorganic Selenium Species by Flow Injection Coprecipitation Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry.

Speciation and Pre-Concentration of Selenium with Nano-ZnO as Absorbent in Environmental Samples

High-performance liquid chromatography of selenoamino acids and organo selenium compounds. Speciation by inductively coupled plasma mass spectrometry

Speciation of selenomethionine and selenocystine using online micro-column containing Cu(II) loaded nanometer-sized Al2O3 coupled with ICP-MS detection

Separation of selenium species in plant tissues by high performance liquid chromatography-ultraviolet treatment-hydride generation atomic fluorescence spectrometry using various mobile phases

Determination and speciation of trace and ultratrace selenium ions by energy-dispersive X-ray fluorescence spectrometry using graphene as solid adsorbent in dispersive micro-solid phase extraction

Sensitive analysis of selenium speciation in natural seawater by isotope-dilution and large volume injection using PTV-GC-ICP-MS

Simultaneous speciation of inorganic arsenic, selenium and tellurium in environmental water samples by dispersive liquid liquid microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry

Thermospray Nebulization As Sample Introduction for Inductively Coupled Plasma Atomic Emission Spectrometry

Quantification of ultra-trace organolead species in environmental water by inductively coupled plasma mass spectrometry with online solid-phase extraction and high performance liquid chromatographic separation

Speciation of selenium-containing small molecules in urine and cell lysate by CE-ICPMS with in-capillary enrichment

Interfacing Nanoliter Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry with an In-Column High-Pressure Nebulizer for Mercury Speciation.

New Method for Simultaneous Arsenic and Selenium Speciation Analysis in Seafood and Onion Samples

Speciation of Selenium Nanoparticles and Other Selenium Species in Soil: Simple Extraction Followed by Membrane Separation and ICP-MS Determination

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry