Abstract:In this work, a novel method of dual silica monolithic capillary microextraction (CME) on-line hyphenated with inductively coupled plasma mass spectrometry (ICP-MS) was developed for the sequential determination of inorganic As(III)/As(V) and Se(IV)/Se(VI) in natural waters. The dual CME column was composed of a 3-mercaptopropyltrimethoxysilane (MPTS) modified silica monolithic capillary (C1) and a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS) modified silica monolithic capillary (C2), which were both prepared by sol-gel technology. Various experimental parameters affecting separation/preconcentration of As(III)/As(V) and Se(IV)/Se(VI) by C1 and C2 were studied in detail and it was found that under pH 3.0, As(III) and Se(IV) were completely adsorbed by C1 while As(V) and Se(VI) could not be retained on C1 and directly passed through C1. As(V) and Se(IV) in the effluent of C1 could be quantitatively retained on C2 under the same operation conditions as C1. With the aid of valve-switching, As(III), Se(IV) and As(V), Se(VI) retained on C1 and C2 were sequentially desorbed by 100 mL of appropriate eluents for subsequent on-line ICP-MS determination. Due to their simultaneous separation from the matrix and quantitative retention on dual silica CME system, the four species of As(III)/As(V) and Se(IV)/Se(VI) could be accurately determined without oxidation/ reduction or subtraction, respectively, and the polyatomic mass interference of Ar-40(35) Cl on As-75 in quadrupole (Q) ICP-MS could be avoided. With a consumption of 5 mL sample solution and 100 mL eluents under the optimized conditions, the detection limits (3 sigma) were found to be 10.9 ng L-1 for As(III), 6.2 ng L-1 for As(V), 31.1 ng L-1 for Se(IV) and 11.6 ng L-1 for Se(VI), and the enrichment factors were 34.3, 36.1, 37.5 and 39.0 for As(III), As(V), Se(IV) and Se(VI), respectively. The relative standard deviations (RSDs) of the four target species were less than 6.5% (C = 1 mu g L-1, n = 7), and the sample throughput was 8 h(-1). Two certified reference materials of environmental water samples, GSBZ50004-88 and GSBZ50027-94, were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The method was also applied for the speciation analysis of inorganic As(III)/As(V) and Se(IV)/Se(VI) in natural waters, and recoveries for the spiked samples were in the range of 88-108%.

Speciation of inorganic selenium in natural water by in situ solid-phase extraction using functionalized silica

Stability of selenium and its speciation analysis in water using automatic system separation and HR-ICP-MS measurement

Simultaneous Speciation of Inorganic Selenium and Antimony in Water Samples by Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry Following Selective Cloud Point Extraction

Organic and Inorganic Selenium Speciation in Environmental and Biological Samples by Nanometer-Sized Materials Packed Dual-Column Separation/Preconcentration On-Line Coupled with Icp-Ms

Solvent Bar Microextraction Combined with Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Speciation of Inorganic Arsenic in Water Samples

Hollow Fiber Liquid Phase Microextraction Combined with Electrothermal Vaporization ICP-MS for the Speciation of Inorganic Selenium in Natural Waters

Polymer Monolithic Capillary Microextraction On-Line Coupled with ICP-MS for Determination of Inorganic Selenium Species in Natural Waters

Simultaneous Speciation of Inorganic Selenium and Tellurium in Environmental Water Samples by Polyaniline Functionalized Magnetic Solid Phase Extraction Coupled with ICP-MS Detection

Graphene Oxide Tio2 Composite Solid Phase Extraction Combined with Graphite Furnace Atomic Absorption Spectrometry for the Speciation of Inorganic Selenium in Water Samples

Speciation Analysis of Selenium in Water Samples by High Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry

Determination and speciation of trace and ultratrace selenium ions by energy-dispersive X-ray fluorescence spectrometry using graphene as solid adsorbent in dispersive micro-solid phase extraction

Simultaneous speciation of inorganic selenium and tellurium by inductively coupled plasma mass spectrometry following selective solid-phase extraction separation

Quantification of ultra-trace organolead species in environmental water by inductively coupled plasma mass spectrometry with online solid-phase extraction and high performance liquid chromatographic separation

Dual silica monolithic capillary microextraction (CME) on-line coupled with ICP-MS for sequential determination of inorganic arsenic and selenium species in natural waters

Nanometer-sized Alumina Packed Microcolumn Solid-Phase Extraction Combined with Field-Amplified Sample Stacking-Capillary Electrophoresis for the Speciation Analysis of Inorganic Selenium in Environmental Water Samples.

Species selective concentration and determination of nano-selenium and inorganic selenium species in environmental waters by micropore membrane filtration and ICP-MS

Sensitive analysis of selenium speciation in natural seawater by isotope-dilution and large volume injection using PTV-GC-ICP-MS

Inorganic Speciation of As(Iii, V), Se(Iv, Vi) and Sb(Iii, V) in Natural Water with Gf-Aas Using Solid Phase Extraction Technology

Simultaneous Enrichment of Inorganic and Organic Species of Lead and Mercury in Pg L−1 Levels by Solid Phase Extraction Online Combined with High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry

On-line Separation and Preconcentration of Inorganic Arsenic and Selenium Species in Natural Water Samples with CTAB-modified Alkyl Silica Microcolumn and Determination by Inductively Coupled Plasma-Optical Emission Spectrometry.

On-line Organoselenium Interference Removal for Inorganic Selenium Species by Flow Injection Coprecipitation Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry.