Abstract:The cathode plasma jets in vacuum arc and the effect of magnetic field on them have been studied for several years and these studies are helpful to understand the arc characteristics and improve the controlling effect of magnetic field on arc plasma. In this paper, the experiments of the cup-shaped axial magnetic field (AMF) contacts were conducted in which a Helmholtz coil was introduced to generate different external imposed AMFs. It was found that the appearance of arc plasma was changed by variation of the external imposed AMF. If the composite AMF in arc column increased gradually, the obvious individual cathode plasma jets were detected, the arc constriction decreased, and the arc stability increased. Meanwhile, the inclination of cathode plasma jets was observed and the inclination direction was found to be consistent with the magnetic field vector direction which is closely related to the composite AMF. By variation of the external imposed AMF and its direction, the inclination direction of cathode plasma jets also changed. The criterion to detect obvious cathode jets in arc column is obtained that at the contact peripheral where R> 80.5% R-0 (R-0 is the contact radius), the AMF strength is no less than 4.5 mT/kA. It was also found that if the composite AMF in interelectrode gap points to different directions at a certain moment, it may lead to the transfer of arc column from the center to the edge of the interelectrode region and the arc instability until when the composite AMF in the interelectrode gap points to the same direction. It can be concluded that the appearance of individual cathode plasma jets can be manipulated by the variation of AMF, which is helpful to study the interaction between arc plasma and electrodes, especially the anode, and improve the interruption performance at higher current.

Axial Magnetic Field Contacts with Nonuniform Distributed Axial Magnetic Fields

Experimental Investigation Of Vacuum Arcs In Nonuniform Axial Magnetic Fields

Experimental Investigation of Vacuum Arc Under Quadrupolar Axial Magnetic Field Contact

Experimental Investigation on the Influence of Axial Magnetic Field Distribution on Resisting the Constriction of A High-Current Vacuum Arc

Experimental and Simulation Research on Influence of Axial Magnetic Field Components on Vacuum Arc Between Transverse Magnetic Field Contacts

Vacuum Arcing Behavior Between Transverse Magnetic Field Contacts Subjected to Variable Axial Magnetic Field

Experimental Investigation on the Characteristics of Vacuum Arc in Coupled AMF Contacts

Influence of Axial Magnetic Field on Cathode Plasma Jets in High-Current Vacuum Arc

Study on Structural Parameters of Cup-Type Axial Magnetic Contacts on Gap Magnetic Field and Arc Characteristics

Vacuum Arc under Axial Magnetic Fields: Experimental and Simulation Research

Numerical simulation of vacuum arc under different axial magnetic fields

Influence of Axial Magnetic Field on Cathode Plasma Jets in High-Current Vaccum Arc

Observation and Investigation of Vacuum Arc under Various Distributed Axial Magnetic Fields

Numerical Analysis on Magnetic Field Characteristic of Axial Magnetic Field Contacts under Long Break Distance

Study on a New Single Coil-Type Axial Magnetic Field Contact for High-Voltage Vacuum Interrupters

Comparison of Axial Magnetic Field Characteristics of Four Axial Magnetic Field Vacuum Interrupter Contacts

Experimental Investigation of Vacuum Arc Characteristic under Axial Magnetic Field

Experimental Investigation on the Vacuum Arc Behaviors of the Axial Magnetic Field (AMF) Electrode with Single Coil Structure

Experimental Investigation of Vacuum Arc Characteristics of Four Kinds of AMF Contacts

Experimental Investigation of Vacuum Arc Characteristics Subject to Axial Magnetic Field Contacts with Different Ratios of Diameter to Gap Distance

Distribution of cathode spots in vacuum arc under nonuniform axial magnetic fields