Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

Numerical Simulation on Heat Transfer and Pressure Drop of a Plate-fin Heat Transfer

Numerical simulation of heat transfer and flow performance of flat fin

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

Numerical simulation on heat performance of finned tube heat exchanger used in low-boiling fluid power generation

Numerical Simulation and Experimental Study of Three-Dimensional Flow Outside Tube of Plate-Fin and Tube Heat Exchangers

Numerical Simulation on the Convection Heat Transfer of a Single-tube Heat Exchanger at Turbulent Condition

Numerical simulation on influence of plate exchanger structural parameter to heat transfer

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical simulation and field synergy analysis of heat transfer performance of radial slit fin surface

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Application Study of Numerical Simulation for Longitudinal Flow of Shell - Side Heat Exchanger

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Numerical Simulation of Heat Transfer and Flow Performance of Slit Surfaces of Wave Plate for Fin and Tube Heat Exchangers

Numerical Simulation of Round Nozzle Impinging on Plate Cooling

Numerical Model of Plate-fin-evaporator Heat Transfer Performance

Numerical Analysis of H-type Finned-tube Heat Exchanger

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Numerical Calculation on the Efficiency of Plate-fin Enthalpy Exchanger

Numerical simulation of slit fin cell's flow and heat transfer