Abstract:The Peierls–Nabarro dislocation model is applied in this paper to investigate the [110] full dislocations on the (001), (111), and (1 ̄10) planes in pure Al, as well as the (110) small-angle tilting grain boundary (SATGB) composed of them. The findings demonstrate that the stress–strain fields of both dislocations and grain boundaries can be accurately described by a five-term single dislocation strain field. The Peierls stresses for the [110] edge-type dislocations on the (001), (111), and (1 ̄10) planes are 67.15 MPa, 114.93 MPa, and 847.56 MPa, respectively, exhibiting an increasing trend in magnitude. As the inter-dislocation distance decreases in the (110) SATGB of Al, the stress field, half-width, decomposition trend, and line energy of individual dislocations gradually decrease. The change in the line energy can be divided into three parts: Initially, there is a slow decrease when the distance is greater than ~200 Å. This is followed by a sharp drop in the line energy as the distance further decreases, with a slowing down of this trend at ~70 Å, where strain energy becomes dominant. In the final stage, the changes in the strained energy and core energy synergistically contribute. The (110) SATGB energy exhibits an increasing trend with the increment of the angle. The Peierls energy and force of the (110) SATGB composed of [110] full dislocations on the Al (001) and (111) surfaces exhibit minimal variation as the distance between dislocations changes, whereas a slight decrease is observed on the (110) surface. The present study provides valuable insights into the investigation of mechanical properties in Al alloys with nanometer-sized grains.

Experimental examination of displacement field in an edge dislocation core in aluminum

Experimental examination of displacement and strain fields in an edge dislocation core

Measurement of Strain Fields in an Edge Dislocation

Experimental examination of strain field within GP zone in an Al–Zn–Mg–Cu alloy

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Generalized stacking fault energy surfaces and dislocation properties of aluminum

Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys

First-Principles Study of Physical Properties of (110) Symmetric Small-Angle Tilting Grain Boundary with Full Dislocation in Aluminum

Hydrogen-enhanced local plasticity in aluminum: an ab initio study

Edge dislocation core structures in FCC metals determined from ab initio calculations combined with the improved Peierls-Nabarro equation

Quantitative Measurement of Deformation Field Around Low-Angle Grain Boundaries by Electron Microscopy

A Complex Stress-Induced Dislocation Core Reconstruction of an Edge Dislocation on the First Pyramidal Plane in Magnesium and Its Abnormal Dislocation Mobility

HRTEM of dislocation cores and thin-foil effects in metals and intermetallic compounds

Can Vacancies Lubricate Dislocation Motion in Aluminum?

The Hierarchical Energy Landscape of Edge Dislocation Glide in Refractory High-Entropy Alloys

Atomistic Simulations for the Evolution of a U-shaped Dislocation in Fcc Al

Direct observations of collinear dislocation interaction in a Fe-17.4 Mn-1.50 Al-0.29 C (wt.%) austenitic steel under cyclic loading by in-situ electron channelling contrast imaging and cross-correlation electron backscatter diffraction

The electronic effect in the 〈100〉 edge dislocation core system with a carbon atom in α-iron: A first-principles study

A Generalized Peierls-Nabarro Model for Curved Dislocations and Core Structures of Dislocation Loops in Al and Cu

Edge Dislocations Can Control Yield Strength in Refractory Body-Centered-Cubic High Entropy Alloys

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD