Abstract:The mechanical properties and biocompatibility of an Ni-free Zr-based bulk metallic glass (BMG) Zr60.14Cu22.31Fe4.85Al9.7Ag3 were investigated in detail to evaluate its potential as a biomaterial. The BMG was found to have a low Young’s modulus of 82±1.9GPa, a high strength of 1720±28MPa and a high fracture toughness of 94±19MPam1/2, as well as good fatigue strength over 400MPa. The corrosion behavior of the alloy was investigated in simulated body fluid (SBF) by electrochemical measurements, which indicates that the Zr-based BMG has a better corrosion resistance than pure Zr and Ti6Al4V. X-ray photoelectron spectroscopy analysis revealed that the passive film formed on the BMG surface is enriched in Al- and Zr-oxides, which could account for the good corrosion resistance of the BMG. On the other hand, metal ion release of the BMG in SBF was determined by inductively coupled plasma mass spectrometry after the BMG was immersed in SBF at 37°C for 30days, showing a ppb (ngml−1) level of metal ion release. The in vitro test via cell culture indicates that the BMG exhibits a cytotoxicity of Grade 0–1, which is as good as Ti6Al4V alloy. Cell adhesion morphological analysis shows that the cells were flattened and well spread out on the surfaces of the BMG, showing that the BMG had good biocompatibility. The combination of good mechanical properties and biocompatibility demonstrates that the Ni-free Zr-based BMG studied in this work is a good candidate for a new type of load-bearing biomedical material.

Biocompatible Zr-Al-Fe Bulk Metallic Glasses with Large Plasticity

A Ni-Free High-Zirconium-Based Bulk Metallic Glass with Enhanced Plasticity and Biocompatibility

High-zirconium Bulk Metallic Glasses with High Strength and Large Ductility

A Series of Zr-Based Bulk Metallic Glasses with Room Temperature Plasticity

Development of Ni- and Cu-Free Zr-based bulk metallic glasses for biomedical applications

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al11Co6Nb5 Bulk Glass-Forming Alloy

A Plastic Ni-free Zr-based Bulk Metallic Glass with High Specific Strength and Good Corrosion Properties in Simulated Body Fluid

Low-cost Zr-based Bulk Metallic Glasses for Biomedical Devices Applications

Biocompatible Ni-free Zr-based Bulk Metallic Glasses with High-Zr-content: Compositional Optimization for Potential Biomedical Applications.

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al1 1co6nb5 Bulk Glass-Forming Alloy

A Novel Ni-free Zr-based Bulk Metallic Glass with Enhanced Plasticity and Good Biocompatibility

Enhanced Plasticity of a Zr50Cu48Al2 Bulk Metallic Glass

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Bulk Metallic Glasses with Large Plasticity: Composition Design from the Structural Perspective

Zr–Ti–Al–Fe–Cu bulk metallic glasses for biomedical device application

Zr–(Cu,Ag)–Al Bulk Metallic Glasses

Ni- and Be-free Zr-based bulk metallic glasses with high glass-forming ability and unusual plasticity.

New Class of Plastic Bulk Metallic Glass.

Formation and Properties of Centimeter-Size Zr–Ti–Cu–Al–Y Bulk Metallic Glasses As Potential Biomaterials

A Ni-free ZrCuFeAlAg bulk metallic glass with potential for biomedical applications.

Al-rich Bulk Metallic Glasses with Plasticity and Ultrahigh Specific Strength