Abstract:Liquid crystals are widely used in photonics because of their profound electro-optic properties. However, the slow switching speeds (milliseconds) and the fluid nature of liquid crystals restrict their potential use in integrated photonics. In this work, polymer-stabilized liquid crystals are utilized as the functional material to improve the response time with a polymer network that helps pre-orientate the liquid crystal. Additionally, plasmonic slot structures are simultaneously employed to minimize the switch voltage by confining the optical field within the electrode spacing at subwavelength scales. Thanks to the large overlap of the optical and electric fields, the scattering states of the polymer-stabilized liquid crystal can be effectively manipulated to modulate the loss of the propagating wave, resulting in strong optical attenuation in the integrated photonic platform. Specifically, a plasmonic enhanced polymer-stabilized liquid crystal photonic device for operation at 1550 nm, which has a length of only 10 mu m and shows an extinction ratio of 0.38 dB mu m-1, with a power consumption of less than 6 mu W and a response time approximate to 20 mu s, resulting in a figure-of-merit of 0.012 mW. A scheme of on-chip integrated optical attenuators for plasmonic slot waveguide-enhanced electro-optical properties of polymer-stabilized liquid crystal film is proposed. This prototype reduces the response time and improves the modulation efficiency of the liquid crystal-based integrated photonic device, resulting in a compact and energy-efficient platform for on-chip optical modulation. image

Design and Fabrication of a Broadband Polymer Vertically Coupled Optical Switch

Cross/bar Polymer Electro–optic Routing Switch with Broadband Flatting Spectral Response over 130 Nm: Principle, Design and Analysis

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

Design of a Polymer Directional Coupler Electro-Optic Switch with Low Push-Pull Switching Voltage at 1550nm

Investigation of a Novel Wide-Spectrum Polymer Electro-Optic Switch with High Extinction Ratio over 40 Db Covering S-C-L Band

The Design of a Directional Coupled Electro-optical Switch Based on the Polymeric Waveguide

Low Crosstalk 1/spl Times/2 Thermooptic Digital Optical Switch with Integrated S-bend Attenuator

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Fabrication of Silicon Photonic Devices by Utilizing Industrial CMOS Technology

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

All-Optical Switch Based on Two-Pump Four-Wave Mixing in Fibers Without A Frequency Shift

High-speed compact silicon digital optical switch with slot structure

Analysis and Optimum Design of a Polymer Y-fed Coupler Electro-Optic Switch Using Double-Section Reversed Electrodes

Compact and Broadband 1 × 4 Optical Switch Based on W2 Photonic Crystal Waveguides

Plasmonic‐Enhanced Polymer‐Stabilized Liquid Crystals Switching for Integrated Optical Attenuation

Polarization-Insensitive Flexible-Grid Wavelength-Selective Switch Based on Tapered Couplers and Microring Resonators

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch

A Polarization Insensitive 2×2 Optical Switch Fabricated by Liquid Crystal–polymer Composite

Low-voltage Micromachining-Based Scalable Optical Switch

Polymer Thermo-Optic Switches with Y-Branch