Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Experimental Study on Particle Feeding and Mixing in the Bottom Zone of a Circulating Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Particle Decelerating Regions in Turbulent Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Research on particle mixing in a fluidized bed

Research on Mixing Character of Fluidized Bed Particles with Image Processing Technique

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Experimental Investigation on Flow Asymmetry in Solid Entrance Region of A Square Circulating Fluidized Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Lateral Solids Mixing In The Dense Zone Of A Circulating Fluidized Bed

Simulation of the Lateral Movement on Particles Under Continuous Feeding and Discharging in a CFB Dense Zone

Comprehensive Study on the Mixing Behavior of Small Dissimilar Particles in a Fluidized Bed

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Experimental study on particles mixing in an annular spouted bed

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed