Abstract:The structural differences at various positions in the GH3625 alloy before and after magnesium treatment were statistically analyzed. In situ observation experiments were conducted at different cooling rates to examine the changes in solidification structure following magnesium treatment. A new theoretical explanation for the differential effects of magnesium treatment was proposed based on classical homogeneous nucleation theory. In practical applications, intermetallic compounds like Laves phase and metal carbides adversely affect the performance of nickel‐based superalloys. Using a high‐temperature confocal laser scanning microscope, the solidification process of as‐cast GH3625 alloy containing Mg at different cooling rates (−20, −35, and −50 °C min−1) is studied. Fitting curves of the volume fraction of the solid phase with solidification temperature before and after Mg treatment are obtained. Trends of solid phase transformation rates with solidification temperature are determined. Differential scanning calorimetry is employed to analyze and statistically evaluate the melting temperature range and enthalpy of each phase during the melting process. Experimental results demonstrate that Mg treatment significantly accelerates the alloy solidification at the cooling rates of −20 and −35 °C min−1, while reducing the area of residual liquid phase at the same solidification temperature, disrupting the Laves/NbC eutectic relationship, and regularizing NbC morphology, transitioning its distribution from aggregation to dispersion. After Mg treatment, the precipitation of the Laves phase is significantly reduced. As a result, the influence mechanism of Mg treatment on the phase transformation and microstructure of GH3625 is clarified based on homogeneous nucleation theory.

Evolution of Microstructures and Phases of Al–Mg Alloy under 4 GPa High Pressure

EXPERIMENTAL STUDY ON THE PHASE RELATIONS OF THE SYSTEM Mg2SiO4-MgAl2O4 AT HIGH PRESSURE AND HIGH TEMPERATURE

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Theoretical insights into the crystal and fundamental properties of MgAl9Zn compound: First-Principles calculations

Structural Phase Transformations Of Mg3n2 At High Pressure: Experimental And Theoretical Studies

Refinement and strengthening mechanism of Mg−Zn−Cu−Zr−Ca alloy solidified under extremely high pressure

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Phase Transformations of Al-bearing High-Entropy Alloys AlxCoCrFeNi (x=0, 0.1, 0.3, 0.75, 1.5) at High Pressure

Formation of Phases and Microstructures in Al-8Si Alloys with Different Mg Content

GPa level pressure-induced phase transitions and enhanced corrosion resistance of AlCrMoSiTi high-entropy alloys

Study on Dendritic Growth in Pressurized Solidification of Mg–Al Alloy Using Phase Field Simulation

Structural and mechanical properties of magnesium aluminate nanoceramics under high pressure

Effect of Coarse β(Al3Mg2) Phase on Microstructure Evolution in 573 K Annealed Al-10Mg Alloy by Uniaxial Compression

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Microstructure and phase transformation of as-cast and annealed Mg–4Zn–1Y alloy containing quasi-crystal phase

First-principles Investigations of the Pressure-Induced Structural Transitions in Mg(AlH4)2

Evolutions of Microstructure and Mechanical Properties in Mg–5Li–1Zn–0.5Ag–0.5Zr–xGd Alloy

Microstructure evolution and corrosion resistance of high-pressure rheo-cast Mg–Zn–Y alloy containing quasicrystal

Unveiling the Microstructural Features during Compression of a High-Modulus Mg-15Gd-8Y-6Al-0.3Mn Alloy Reinforced by a Large Volume of Al2RE Phases

Pressure-induced Amorphous-to-amorphous Configuration Change in Ca-Al Metallic Glasses

Quasicrystal phase evolution and mechanical properties of Mg-3.5Zn-0.6Gd alloy processed by high-pressure torsion