Abstract:ABSTRACT Organo‐modified nanoclay (Cloisite 30B) was added via direct melt mixing to the acrylonitrile butadiene rubber/poly(vinyl chloride) (PVC/NBR) to fabricate polymer blend/clay nanocomposites. The states of nano‐fillers dispersion were investigated by transmission electron microscopy (TEM) and X‐ray diffraction (XRD). From the morphological study of nanocomposites, it is concluded that exfoliated morphology is obtainable by introduction of 2.5 vol % of nanoclay. The effect of nano‐filler volume content on the mechanical properties of PVC/NBR matrix reinforced by Cloisite 30B was investigated by tensile test. Experimental results show that the Young's modulus and tensile strength of composites can significantly improved with a small amount of nanofiller. Moreover, to investigate the stress–strain behavior of NBR/PVC nanocomposites, seven constitutive models such as Arruda–Boyce, Mooney–Rivilen, Marlow, second order of polynomial, Van der Waals, and third order Odgen were studied and compared with experimental data. Results showed that Malow and second order polynomial model can be used for nanoclay‐filled compound whereas the other models show more deviation from experimental data. Three micromechanical models named liner rule of mixtures (LROM) and the inverse rule of mixtures (IROM). Halpin–Tsai theory was applied to evaluate the dependence of Young modulus of nanocomposites on volume fraction of nanofiller. Two modifying factors were proposed to evaluate the Young's modulus of nanocomposites which could greatly improve the theoretical prediction obtained from inverse rule of mixtures (IROM) and Halpin–Tsai equation. The modifying factors were introduced by adopting an exponential, power‐law and linear factors in the equation. In order to verify the suitability of the modified models, the ensuing theoretical predictions are compared to the other experimental data available in the literature. Good predictability of the modified models is demonstrated in the results. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3229–3239, 2013

Intercalation process and rubber–filler interactions of polybutadiene rubber/organoclay nanocomposites

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Interface tailoring of layered silicate/styrene butadiene rubber nanocomposites

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Preparation and Properties of Nanocomposites Based on Different Polarities of Nitrile–butadiene Rubber with Clay

Effect of triethylene glycol bis(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionate on structure and mechanical properties of nitrile butadiene rubber/clay nanocomposites

Effect of Polyethylene Glycol-Intercalated Organoclay on Vulcanization Characteristics and Reinforcement of Natural Rubber Nanocomposites

Improved mechanical properties and abrasion resistance of styrene butadiene rubber/butadiene–styrene–vinyl pyridine rubber/clay nanocomposites with strong interfacial interaction

Influence of organic modifier structures of 2D clay layers on thermal stability, flammability and mechanical properties of their rubber nanocomposites

Unusual Rheological Behavior of Liquid Polybutadiene Rubber/Clay Nanocomposite Gels: the Role of Polymer−Clay Interaction, Clay Exfoliation, and Clay Orientation and Disorientation

Preparation and characteristics of nitrile rubber (NBR) nanocomposites based on organophilic layered clay

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/butadiene (core) Styrene Acrylonitrile-G-Maleic Anhydride (shell) Latex/Organoclay Ternary Nanocomposites

Critical Effect of Segmental Dynamics in Polybutadiene/Clay Nanocomposites Characterized by Solid State 1H NMR Spectroscopy

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation

Impacts of Interfacial Interaction on Properties of Melamine Formaldehyde Microsphere/rubber: I. Filler Dispersion and Curing Dynamic

The influence of montmorillonite on the anti-reversion in the rubber-clay composites

Modification of Theoretical models to predict mechanical behavior of PVC/NBR/organoclay nanocomposites

Structure-property relationships in isotactic poly(propylene)/ethylene propylene rubber/montmorillonite nanocomposites

The synthesis and characterization of polyurethane/clay nanocomposites

The use of montmorillonite as a reinforcing and compatibilizing filler for NBR/SBR rubber blend

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites