Abstract:Due to the varying cooling conditions within different internal areas, there is a notable disparity in the cooling rates. This discrepancy has resulted in severe elemental segregation and the formation of coarse M C phases in the Φ508 mm GH4151 superalloy ingot, which has undergone triple smelting (VIM + ESR + VAR). These factors have had detrimental effects on the stability of the alloy structure. The solidification segregation, microstructure evolution, and secondary phase precipitation behaviors of GH4151 alloy under a wide cooling rate range were studied through Differential Scanning Calorimetry (DSC), in situ observations with High-Temperature Confocal Laser Scanning Microscopy (HT-CLSM), Directional Solidification (DS), and Computational Fluid Dynamics (CFD). The results show that the solidification path of GH4151 can be summarized as (1)L → γ (1334.6 °C); (2) L → γ + M C (1281 °C and 1258 °C); (3)L → γ + M C + γ/γ' + Laves (1152 °C); (4)L → γ + M C + γ/γ' + Laves+ M 2 B (1084 °C), where MC, γ/γ', Laves, and M 2 B are the main precipitate types during the solidification process. Mo, Nb, and Ti are the main dendritic segregation elements. Due to the reverse diffusion of solute elements under low cooling rates, the element segregation presents an increasing and then decreasing trend with the increase in cooling rate. The maximum segregation rate occurs at 24 °C/min. The cooling rate dramatically influences the morphology of the solid-liquid interface. The prediction formulas for PDAS and SDAS of GH4151 alloy under slow cooling conditions are λ 1 = 1137.1· V -0.25 · G -0.5 and λ 2 = 153.6· V c -0.32 respectively. Similarly, with the increase of solidification speed, the size of γ' phase, Laves phase, γ/γ' phase, and M C gradually decreases. When the cooling rate exceeds 12 °C/min, the large blocky M C phase evolves into elongated bars. The cooling rate from the center to the surface of the Φ508 mm VAR ingot ranges from 5 to 20 °C/min, with the standout being that the fastest cooling rate at the edge is about 48 °C/min.

Interface Morphologies and Microstructure of a Single Crystal Superalloy under High Thermal Gradient Directional Solidification

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Influence of directional solidification variables on the microstructure and crystal orientation of AM3 under high thermal gradient

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Study Progress in Phase-field Simulation of Directional Solidification Microstructure

Effect of the Cooling Rate on the Microstructure of Directionally Solidified Casting (CMSX-4 Ni Superalloy)

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

Rapid Solidification Structure Refinement Mechanism in Highly Undercooled Cu Based Ternary Alloys

Kinetics and microstructural evolution during recrystallization of a single crystal superalloy

Simulation and Experimental Study on the Directional Solidification Process of a Single Crystal Superalloy Plate Casting

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

Microstructure evolution and solidification behaviour of Nb–16Si–22Ti–2Cr–2Al–6Hf alloy processed by directional solidification

Solidification Characteristics and As-Cast Microstructure of Rhenium-Containing Single Crystal Superalloys under High Thermal Gradient Directional Solidification

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Effect of the cooling rates on the microstructure and segregation characteristics in directionally solidified GH4151 superalloy

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy