Abstract:In the cutting process, there are many parameters that affect the cutting effect, and the same parameter has different degrees of influence on different performance indicators, which makes it difficult to select key parameters for parameter optimization and parameter combination evaluation while considering multiple performance indicators at the same time. The process of titanium alloy milling with an integrated end mill is studied herein. The values of cutting tool flank face wear and material removal rates are obtained with experimental and analytical methods. Numerical characteristics and causes of the cutting tool flank face wear at different stages are also analyzed. The dynamic, comprehensive evaluation method based on the double incentives model is used to evaluate the dynamic, comprehensive importance of cutting parameters in view of the problem of considering multiple performance indicators and the characteristics of the dynamic change in performance indicators in the cutting process. According to the result of a dynamic, comprehensive evaluation, the cutting parameters with the highest comprehensive importance are selected. Finally, the radar map is used to plot the comprehensive importance of the cutting parameters. The overall comprehensive importance of each cutting parameter is intuitively displayed as well. As a result of the research, the dynamic, comprehensive evaluation method based on the double incentives model has a good application value in the evaluation of tool performance in the cutting process and can quickly select the best tool performance parameter combination; it is established that the most comprehensive parameter is the cutting speed, and the cutting width is the second most important. In turn, the comprehensive importance of the cutting depth is the lowest.

On Plunge Milling Process Parameters Optimization for TC11 Titanium Alloy

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Experimental Study on the Optimization of Ti1023 Milling Parameters

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Cutting Tool Selection and Cutting Parameter Optimization of Titanium Alloy Rough Milling

Temperature Experiment and Parameter Optimization of Cemented Carbide Tool in Milling 508III Steel

Optimization of machining parameters for turning operation of heat-treated Ti-6Al-3Mo-2Nb-2Sn-2Zr-1.5Cr alloy by Taguchi method

The Dynamic Comprehensive Evaluation of the Importance of Cutting Parameters in the Side Milling TC4 Process Using an Integrated End Mill

Investigation of Cutting Force in High Feed Milling of Ti6al4v

Research on cutting performance and tool life improvement methods of titanium alloy ultra-high speed milling tools

Optimization of Machining Parameters for Milling Zirconia Ceramics by Polycrystalline Diamond Tool

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Study on Numerical Simulation and Experiment of Titanium Alloy for High Speed Milling

Molecular dynamics simulation of the effect of tool parameters on nano-cutting of polycrystalline γ-TiAl alloys

Temperature modeling analysis for milling of titanium alloy

Optimization of process parameters for surface roughness and tool wear in milling TC17 alloy using Taguchi with grey relational analysis