Abstract:A strategy for optimizing the rolling resistance, wet skid and cut resistance of reinforced rubber simultaneously using a supramolecular filler is demonstrated. A β-alanine trimer-grafted Styrene Butadiene Rubber (A3-SBR) pristine polymer was designed and mechanically mixed with commercially available styrene butadiene rubber to help the dispersion of a β-alanine trimer (A3) supramolecular filler in the rubber matrix. To increase the miscibility of A3-SBR with other rubber components during mechanical mixing, the pristine polymer was saturated with ethanol before mixing. The mixture was vulcanized using a conventional rubber processing method. The morphology of the assembles of the A3 supramolecular filler in the rubber matrix was studied by Differential Scanning Calorimetry (DSC) and Transmission Electron Microscopy (TEM). The Differential Scanning Calorimetry study showed that the melting temperature of β-sheet crystals in the vulcanizates was around 179 °C and was broad. The melting temperature was similar to that of the pristine polymer, and the broad melting peak likely suggests that the size of the crystals is not uniform. The Transmission Electron Microscopy study revealed that after mixing the pristine polymer with SBR, some β-sheet crystals were rod-like with several tens of nanometers and some β-sheet crystals were particulate with low aspect ratios. Tensile testing with pre-cut specimens showed that the vulcanizate containing A3-SBR was more cut-resistant than the one that did not contain A3-SBR, especially at a large cut size. The rolling resistance and wet skid were predicted by dynamic mechanical analysis (DMA). DMA tests showed that the vulcanizates containing A3-SBR were significantly less hysteretic at 60 °C and more hysteretic at 0 °C based on loss factor. Overall, the "magic triangle" was expanded by optimizing the rolling resistance, wet-skid, and cut resistance simultaneously using a β-alanine trimer supramolecular filler. The Payne effect also became less severe after introducing the β-alanine trimer supramolecular filler into the system.

Rubber as additives to lower thermal expansion coefficient of plastics: 1. Morphology and properties

Thermoplastic Rubber/pp Elastomers Toward Extremely Low Thermal Expansion

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Linear Rheology of Natural Rubber Compounds Filled with Silica, Short Nylon Fiber or Both

Rubber‐toughened PLA Blends with Low Thermal Expansion

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Rubber‐toughened Polyamide‐6 with a Low Thermal Expansion Coefficient: Effect of Preferential Distribution of Rubber and Inorganic Filler

A New Approach to Fabricate Polypropylene Alloy with Excellent Low-Temperature Toughness and Balanced Toughness-Rigidity Through Unmatched Thermal Expansion Coefficients Between Components

Non-rubber components tuning mechanical properties of natural rubber from vulcanization kinetics

Regulation effects of trans-1, 4-poly (isoprene-co-butadiene) copolymer on the processability, aggregation structure and properties of chloroprene rubber

Reclaimed Rubber/Poly(ε-caprolactone) Blends: Structure, Mechanical, and Thermal Properties

Coupling Effect of Molecular Weight and Crosslinking Kinetics on the Formation of Rubber Nanoparticles and Their Agglomerates in EPDM/PP TPVs During Dynamic Vulcanization.

Effects of Compatibilizing Agent and in Situ Fibril on the Morphology, Interface and Mechanical Properties of EPDM/nylon Copolymer Blends

Expanding the "Magic Triangle" of Reinforced Rubber Using a Supramolecular Filler Strategy

Effect of Interface on Bulk Polymer: Control of Glass Transition Temperature of Rubber

Enhancing the performance of natural rubber by employing modified expanded graphite at varying expansion volumes

Roles played by novolac resin on rubber compounding, reinforcement and nonlinear rheological behaviors

Rheological properties of abs polymer melts having a good dispersion of rubber particles

Influence of Interfacial Compatibilizer, Silane Modification, and Filler Hybrid on the Performance of NR/NBR Blends

Influence of polar‐modified ESBO on the thermal and mechanical properties of FKM/EPDM rubber blends

Studies on Crystallization and Thermal Expansion Behavior of Pa6/Sebs Blends with Co-Continuous Structure