Abstract:Progress in Rubber, Plastics and Recycling Technology, Ahead of Print. Processability of thermoplastic natural rubber (TPNR) blends is a vital aspect in the preparation of blends for industrial applications and is assessed using different techniques. In this study, skim natural rubber/Polypropylene (SNR/PP) blends were prepared using melt mixing and their processability was examined in terms of mixing torque development, long-term processability, moving die rheometer (MDR) torque, thermo-gravimetric analysis (TGA), melt flow index (MFI) and morphological studies. A series of unvulcanized (UV) and dynamically vulcanized (DV) blends having 70/30, 60/40, 50/50, 40/60, and 30/70 SNR/PP compositions were prepared. Standard Lanka Rubber (SLR) and PP blends having corresponding ratios were also studied for the purpose of comparison. The study reveals that a high percentage of non-rubbers present in the SNR has positively influenced the processability of both UV and DV SNR/PP blends compared to SLR/PP blends as assessed by the mixing torque values. As suggested by the mixing torque development and long-term processability, natural rubber dominant both DV blends cannot be processed. However, they can be processed under low shear rates as shown in the MDR studies irrespective of the rubber type. Therefore, it can be inferred that these rubber dominant blends can be processed into molded products via compression molding technique. TGA studies revealed that a similar degree of protection has been offered to the blends against thermal degradation by SNR and SLR. MFI studies showed that there is no significant difference in flowability between UV SNR/PP blends and SLR/PP blends. However, for DV blends, SNR/PP blends showed a higher flowability than SLR/PP blends. In addition, increase in PP percentage in the blend enhances the flowability while dynamic vulcanization reduces the flowability irrespective of the type of rubber used in the blends. Morphological studies suggest continuous or co-continuous phase structures for UV blends and two-phase structures for DV blends where the plastic phase acts as the continuous phase.

Dynamically vulcanized polylactic acid/natural rubber/waste rubber blends: effect of the rubber content

Sustainable thermoplastic elastomers based on thermoplastic polyurethane and ground tire rubber

Investigation of Rheological, Morphological and Mechanical Properties, Thermal Stability, Biodegradability of the Dynamically Cured Natural Rubber/Polyester Blends

Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition

Bio-based thermoplastic vulcanizates from natural rubber (bioplastic/NR)

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Effect of the thermoplastic types and ratios for the 3D printed thermoplastic natural rubber vulcanizates: Mechanical, dynamical, thermal, printed-structural properties

Bio-Polyester/Rubber Compounds: Fabrication, Characterization, and Biodegradation

Toughened Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Epoxidized Natural Rubber Blends Fabricated by Dynamic Vulcanization and Interfacial Compatibilization

The effect of physical compatibilization and dynamic vulcanization on the properties of thermoplastic vulcanizates derived from polypropylene and natural rubber blends

Reclaimed Rubber/Poly(ε-caprolactone) Blends: Structure, Mechanical, and Thermal Properties

The effect of dynamic vulcanization on the morphology and biodegradability of super toughened poly(lactic acid)/unsaturated poly(ether-ester) blends

Curing behaviors, mechanical properties, dynamic mechanical analysis and morphologies of natural rubber vulcanizates containing reclaimed rubber

Preparation of skim natural rubber and polypropylene blends via melt blending: A study on processability

Biodegradable thermoplastic natural rubber based on natural rubber and thermoplastic starch blends

Bio-based thermoplastic natural rubber based on poly(lactic acid)/thermoplastic starch/calcium carbonate nanocomposites

Reinforcing and plasticizing effects of reclaimed rubber on the vulcanization and properties of natural rubber

Use of crosslinking agent to produce high‐performance PLA/EVA blends via reactive processing

Effect of Tulbaghia violacea‐Derived Devulcanized Rubber on the Properties of Natural Rubber/Styrene‐Butadiene Rubber Blends

Micromechanical modeling of devulcanized ground tyre rubber, graphene platelets, and carbon black in recycled natural rubber blends

A super-toughened poly(lactic acid)-based thermoplastic vulcanizate through incorporating modified SiO2 nanoparticles