Abstract:Vertical cylindrical welded steel tanks are typical thin-walled structures which are very susceptible to buckling under wind load. This paper investigates the buckling behavior of open-topped steel tanks under wind load by finite element simulation. The analyses cover six common practical tanks with volumes of 2×103m3 to 100×103m3 and height-to-diameter ratios H/D<1. The linear elastic bifurcation analyses are first carried out to examine the general buckling behavior of tanks under wind load, together with comparison to that of tanks under uniform pressure and windward positive pressure (only loaded by positive wind pressure in the windward region). The results show that for larger tanks in practical engineering, the stability carrying capacity of wind load is relatively lower. It is also indicated that the buckling behavior of tanks under wind load is governed by the windward positive pressure while wind pressure in other region of tank essentially has no influence on the buckling performance. The geometrically nonlinear analyses are then conducted to investigate the more realistic buckling behavior of tanks under wind load. It is found that the buckling behaviors of perfect tanks and imperfect tanks are much different. The weld induced imperfection only has little influence on the wind buckling behavior while the classical buckling mode imperfection has significant influence, leading to a considerable reduction of wind buckling resistance. The influences of thickness reduction of cylindrical wall, liquid stored in the tank and wind girder on the buckling behavior are also examined. It shows that the thickness reduction of cylindrical wall considerably reduces the wind buckling resistance while sufficient liquid stored in the tank and wind girder significantly increase the wind buckling resistance.

Finite Element Analysis on Stability and Strength of Tank Roof with Reinforcing Ribs

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

RESEARCH ON THE COORDINATED WORKING BETWEEN SINGLE LAYER-LATTICED SHELL ROOF AND STORAGE TANK

INSTABILITY BEHAVIOR OF PARTIAL DOUBLE-LAYER LATTICE-RIBBED DOMES

Stability Analysis of Floating-Roof Tanks under Differential Settlement

Stability analysis of roof structure of Zhejiang University Zijingang Gymnasium

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Finite Element Modelling of Thin-Walled Members in Overall Stability Analysis

Design and Stability Analysis of the Latticed Shell Structure Located at Yuyao Tianluoshan Relic

Numerical Investigation on Stability of Reticulated Shell Structures Composed of Built-Up Plate Members

STUDY OF THE STRESS DISTRIBUTION AND MECHANICAL PROPERTIES OF THE BEAM-COLUMN JOINT IN STEEL ROOF TRUSS BASED ON FULL-SCALE TESTS

ADAPTIVE FINITE ELEMENT PROCEDURE FOR PIPE SECTION LATTICED SHELL STRUCTURES

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

MULTI-SCALE FINITE ELEMENT SIMULATION OF RETICULATED SHELL CONSIDERING DEFORMATION OF WELDED HOLLOW SPHERICAL JOINTS

Buckling of Cylindrical Open-Topped Steel Tanks under Wind Load

Design of a New Bearing on the Large Net Shell Roof Tank

STRESS TEST ANALYSIS OF 15×10~4 m~3 FLOATING ROOF TANK MADE OF HOME-MADE STEEL PLATE

Buckling Analysis of Tank Roof with Construction Defect Based on Finite Element Method

A New Bearing Structure of Large Storage Tanks with A Reticulated Shell Dome and its Optimization

Strength Analysis of Vertical Metal Tank Wall and Bottom Plates Conection Area

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method