Abstract:The trend related to reach the high operating temperature condition (HOT, temperature, T > 190 K) achieved by thermoelectric (TE) coolers has been observed in infrared (IR) technology recently. That is directly related to the attempts to reduce the IR detector size, weight, and power dissipation (SWaP) conditions. The room temperature avalanche photodiodes technology is well developed in short IR range (SWIR) while devices operating in mid-wavelength (MWIR) and long-wavelength (LWIR) require cooling to suppress dark current due to the low energy bandgap. The paper presents research on the potential application of the HgCdTe (100) oriented and HgCdTe (111)B heterostructures grown by metal-organic chemical vapor deposition (MOCVD) on GaAs substrates for the design of avalanche photodiodes (APDs) operating in the IR range up to 8 µm and under 2-stage TE cooling (T = 230 K). While HgCdTe band structure with molar composition xCd < 0.5 provides a very favorable hole-to-electron ionization coefficient ratio under avalanche conditions, resulting in increased gain without generating excess noise, the low level of background doping concentration and a low number of defects in the active layer is also required. HgCdTe (100) oriented layers exhibit better crystalline quality than HgCdTe (111)B grown on GaAs substrates, low dislocation density, and reduction of residual defects which contribute to a background doping within the range ~1014 cm-3. The fitting to the experimentally measured dark currents (at T = 230 K) of the N+-ν-p-P+ photodiodes commonly used as an APDs structure allowed to determine the material parameters. Experimentally extracted the mid-bandgap trap concentrations at the level of 2.5 × 1014 cm-3 and 1 × 1015 cm-3 for HgCdTe (100) and HgCdTe (111)B photodiode are reported respectively. HgCdTe (100) is better to provide high resistance, and consequently sufficient strength and uniform electric field distribution, as well as to avoid the tunneling current contribution at higher bias, which is a key issue in the proper operation of avalanche photodiodes. It was presented that HgCdTe (100) based N+-ν-p-P+ gain, M > 100 could be reached for reverse voltage > 5 V and excess noise factor F(M) assumes: 2.25 (active layer, xCd = 0.22, k = 0.04, M = 10) for λcut-off = 8 μm and T = 230 K. In addition the 4-TE cooled, 8 μm APDs performance was compared to the state-of-the-art for SWIR and MWIR APDs based mainly on III-V and HgCdTe materials (T = 77-300 K).

Fabrication and performances of arsenic-doped HgCdTe long-wavelength infrared photodiode arrays

Enhanced Performance of HgCdTe Long-Wavelength Infrared Photodetectors with Nbn Design

PbTe Thin Film Mid-Infrared Photoconductive Detectors Grown by Molecular Beam Epitaxy

A Junction-Level Optoelectronic Characterization of Etching-Induced Damage for Third-Generation HgCdTe Infrared Focal-Plane Array Photodetectors

Latest Developments in Long-Wavelength and Very-Long-Wavelength Infrared Detection with p-on-n HgCdTe

Research on PbTe/Pb_(1-x)Sr_xTe Multi-Quantum Well Mid-Infrared Light Emitting Device

Design and Fabrication of High Performance InGaAs near Infrared Photodetector

Bi 2 S 3 Electron Transport Layer Incorporation for High-Performance Heterostructure HgTe Colloidal Quantum Dot Infrared Photodetectors

Low Dark Current HgCdTe Long Wavelength Infrared Photodiodes with Bandgap Gradient Multi-Layer Heterojunction

Study of HgCdTe (100) and HgCdTe (111)B Heterostructures Grown by MOCVD and Their Potential Application to APDs Operating in the IR Range up to 8 µm

HgCdTe/CdTe/Si infrared photodetectors grown by MBE for near-room temperature operation

A bandgap-engineered HgCdTe PBπn long-wavelength infrared detector

High-performance HgCdTe avalanche photodetector enabled with suppression of band-to-band tunneling effect in mid-wavelength infrared

Molecular Beam Epitaxy and Characterizations of PbTe Grown on GaAs(211) Substrates Using CdTe/ZnTe Buffers

HgTe Nanocrystal-Based Photodiode for Extended Short-Wave Infrared Sensing with Optimized Electron Extraction and Injection

Design of a Bandgap-Engineered Barrier-Blocking HOT HgCdTe Long-Wavelength Infrared Avalanche Photodiode

Enhanced Performance of HgCdTe Midwavelength Infrared Electron Avalanche Photodetectors with Guard Ring Designs

Improved performance of HgCdTe infrared detector focal plane arrays by modulating light field based on photonic crystal structure

Long-wavelength InAs/GaSb superlattice double heterojunction infrared detectors using InPSb/InAs superlattice hole barrier

Fabrication of 2D PdSe2/3D CdTe Mixed-Dimensional van der Waals Heterojunction for Broadband Infrared Detection

Scalable fabrication of long-wave infrared PtSe 2 -G heterostructure array photodetectors