Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Application of Beam Grid Method on the Static Load Test for Box Girder Bridges

An analytical method and its application for large-section PC box girder bridges

On Sectional Properties Correction of Grillage Model of Composite Bridges with Multi-box Girder

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Comparison and Analysis of Models of 3D Calculation of Skew-beam Bridges

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Research on evaluation method of bearing capacity of existing bridge based on static load test

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Crack Width Calculation Methods of Reinforced Concrete Bridges and Application of Box Girder Bridge

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Research on Calculation Method of the Transverse Internal Force of Trapezoid Multi-cellular Box Girder Bridge

RESEARCH ON STATIC LOAD TEST AND ANALYSIS OF PRESTRESSED CONCRETE BEAM

Analysis on static load testing coefficient of prestressed concrete simply-supported and voided slab beam bridge