Research Progress of UV-curing water-borne coatings

Li Hongqiang,Zeng Xingrong

DOI: https://doi.org/10.3969/j.issn.1006-2556.2007.05.008

2007-01-01

Abstract:This paper narrates the characteristics of domestic and overseas UV-curable water-borne coatings and research progress in oligomer and light initiator;points out the problems;and forecasts the future development.

What problem does this paper attempt to address?

Research Status and Progress of Photoinitiator

Zhu Junfei,Gong Ling,Fan Bin,Li Mengwei,Zhao Qian,Qian Chao,Chen Xinzhi

DOI: https://doi.org/10.3969/j.issn.0253-4312.2010.05.021

2010-01-01

Abstract:UV-curing technology was widely used in many fields including paints,printing inks and adhesives for its great benefits in low energy consuming and environment protection.Photoinitiator played the most important role in UV-curing system,its exploitation and development had a significant impact on the progress of UV-curing products.The classification,character and synthetic method of traditional photoinitiator were summarized in this article,and the developing direction of photoinitiator was pointed out.The advantages,character and synthetic method of new photoinitiator were also introduced.
The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Wei Yanyan,Luo Yingwu,Li Baofang,Li Bogeng

DOI: https://doi.org/10.3969/j.issn.0253-4312.2007.05.010

2007-01-01

Abstract:A series of waterborne UV-curable polyurethane acrylates were synthesized.Their coatings properties were investigated.The influences of radiation time,film thickness,photoinitiator dosage,molecular structure and other factors on the coating properties were discussed.Therefore a series of UV curable polyurethane acrylate emulsions with excellent mechanical properties and decorative effect.The crosshatch adhensions of the coatings were between 0 and 1.Impact strengths are above 50 cm.The pencil hardness of the coatings film are over 3H.
Water-soluble UV Curable Urethane Methyl Acrylate Coating: Preparation and Properties

Wel Yan-yan,Luo Ying-wu,Li Bao-fang,Li Bo-geng

DOI: https://doi.org/10.1007/bf02947596

2004-01-01

Journal of Zhejiang University SCIENCE A

Abstract:Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous solutions was in vestigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity even at high solid fraction of 0.55. The drying process of the coatings and the properties of the cured coatings were studied by comparing them with waterdispersed UV-curable polyurethane methyl acrylate. It was evident that the water-soluble coating dried more slowly; and that the overall properties were inferior to those of the water-dispersed coating.
Ultraviolet Curing Coatings and its Progress

LI Xiao-yong,YOU Chang-jiang,ZHANG Xiao-yan,FANG Min

DOI: https://doi.org/10.3969/j.issn.1009-220X.2007.02.014

2007-01-01

Abstract:The ultraviolet curing coating,which has the characteristic of high efficiency and low consumption,is a kind of environmental conservation and energy saving coating.The characteristics,curing mechanism,main components such as oligomers,reactive diluents,photoinitiators and assistants,and the future development of the ultraviolet curing coating were summarized.
Preparation of Water-borne UV Coatings

顾斌,沈雪锋,王坚,魏忠华

DOI: https://doi.org/10.3969/j.issn.1009-1696.2005.12.003

2005-01-01

Abstract:The novel water-borne UV coatings was manufactured by direct dispersion of epoxy acrylate oligomer into water, then combination with the relevant initiator of photopolymerization. The article made an analysis of the factors influenced upon the performance and comparison with the properties of the similar solvent-borne UV coatings.
Synthesis and Study of Novel UV-Curable Powder Coatings

Jie XU,Bao-fang LI,Ying-wu LUO,Gang CHEN,Bo-geng LI

DOI: https://doi.org/10.3321/j.issn:1003-9015.2005.05.027

2005-01-01

Abstract:Two kinds of acrylate-modified polyesters were synthesized, one of the two is semi-crystalline while the other is amorphous, and the UV-curable powder coatings with two components can be made up by mixing these two kinds of polyesters in different ratios. Experiments show that the introduction of semi-crystalline polyester into the coating will substantially improve the direct and reverse impact resistance and the crosshatch adhesion of the cured film while the other general properties of the UV-curable powder coatings remain excellent.
The Research Progress of Water-borne Polyurethane in Wood Coatings

LI Wei-hu,DAI Jia-bing,ZHANG Xing-yuan

DOI: https://doi.org/10.3969/j.issn.1006-2556.2013.06.005

2013-01-01

Abstract:This paper mainly introduces the study progress of water-borne polyurethane in wood coatings.It mainly focuses on the study progress of water-borne polyurethane-acrylic ester,UV curing water-borne polyurethane,two-component water-borne polyurethane and water-borne polyurethane modification.
Research Progress of Waterborne Epoxy Resin Systems

Wenshi Ma

2006-01-01

Abstract:This paper systematically reviewed the research progress and the methods for preparation of waterborne epoxy resin,and compared the advantage and disadvantage of the methods.The curing mechanism of the system and the modification methods of the curing agents were analyzed.The characteristic and the application of the recent waterborne epoxy resin system were summarized.
Study Progress in Water-borne Polyurethane

LI Wei-guo,HUANG Ke-lin,LIAO Xiao-xin,LI Ke-xian,LUO Su-juan,LIU Yu-hong,HUANG Shang-shun,HE Yao-liang

DOI: https://doi.org/10.3969/j.issn.1671-9905.2009.11.006

2009-01-01

Abstract:The preparation and modification methods of the water-borne polyurethane were introduced.Some suggestions for the future development were put forward.
Progress of Application of Inorganic Nano-Particles Modified with Coupling Agents in Waterborne Coatings

Ye Chaoxian,Li Hongqiang,Cai Aman,Zeng Xingrong

DOI: https://doi.org/10.3969/j.issn.0253-4312.2009.07.017

2009-01-01

Abstract:The progress of inorganic nano-particles modified with coupling agents was reviewed,and the application of the modified nano-particles in waterborne coatings,was described including high-performance coatings,self-cleaning and anti-fouling coatings,photocatalytic coatings and UV-curable protective coatings.The existing problems were pointed out and the development trend was forecasted.
Research and applications of UV-curable conductive polymer materials

Zhang Shihu,Yu Demei

DOI: https://doi.org/10.3969/j.issn.1006-3536.2011.04.011

2011-01-01

Abstract:The light-curing conductive polymers,as well as related concepts and theory were briefly discussed,highlighting the combining of UV-curing technology and the concept of conducting polymers used to prepare light-cured conductive polymer composite materials,and current research in this area has been done a detailed introduction.It was predicted that the technology combining the advantages of light-cured and conductive polymer materials,will get enough attention of researchers in the future,and will be more and more popular in the world market.
Application of Waterborne UV Curable Coating for Plastics

Wang Jian,Gou Xiaoqing,Shen Xuefeng

DOI: https://doi.org/10.3969/j.issn.0253-4312.2009.11.013

2009-01-01

Abstract:This article has discussed the advantages and characteristics of waterborne UV curable coatings applied on plastics.The emulsified waterborne coatings was used as clear topcoat for plastics shows the same water resistance and abrasion resistance as conventional UV coatings.Factors influencing the coatings performance were also discussed.
Research and Application Progress of Vacuum Ultraviolet (185 nm) in Water Treatment

Zheng-di WU,Dong WEN,Meng-kai LI,Zhi-min QIANG

DOI: https://doi.org/10.19853/j.zgjsps.1000-4602.2017.22.009

2017-01-01

Abstract:Vacuum ultraviolet (VUV,185 nm) and VUV-based advanced oxidation processes (VUV-AOPs),as emerging water treatment technologies,have attracted increasing attention of researchers in water treatment field.The present paper first summarizes the VUV light sources,VUV fluence determination,and main reactions involved in pure water system.Then,the applications of VUV and VUV-AOPs to pollutant removal and water disinfection are introduced together with their treatment cost estimations.Finally,future development directions of the VUV and VUV-AOPs in water treatment are proposed.
Application of uv Cure Technology and Progress in Photopolymerization in China

Fu Zhan,Wenfang Shi

2008-01-01

Abstract:This report summarizes the 2007 output and production values of 129 leading Chinese coatings industry, companies, including 40 that produce raw materials, 81 that manufacture UV formulations (some of them supply multiple products), and eight that supply UV lamps and equipment. A total UV/EB cure technology, growth rate of approximated), 13.5% in 2007 was estimated. It is noted that all the statistical data were from UV curing industries, because EB curing is still limited. Some recent progress in the application of UV technology ill China is also briefly, reviewed.
Progress in Ambient Self-Crosslinking Technology of One Component Waterborne Coatings

Peng Jun,Ren Biye,Ouyang Zhentu

DOI: https://doi.org/10.3969/j.issn.0253-4312.2012.11.019

2012-01-01

Abstract:Appropriate cross-linking is one of the important ways to improve the performance of coatings.The functional monomers capable of self-condensation or auto-oxidation were introduced into the molecular chain of the coating resin,and the self-crosslinking of one component waterborne coating was conducted through the self-condensation or auto-oxidation of the functional monomer during the film formation at ambient temperature.Compared with the traditional waterborne coatings,one component waterborne coatings based on the ambient temperature self-crosslinking technology has many characteristics,such as environmental protection,energy conservation and low price.The progress in ambient temperature self-Crosslinking technology of one component waterborne coatings was reviewed in this paper.Various self-crosslinking systems and mechanisms including self-crosslinking of N-methylol acrylamide and its derivatives and epoxy groups,and siloxanes,auto-oxidation of unsaturated fatty acids,were summarized,and the development trends of self-crosslinking technologies of waterborne coatings were prospeted.
The Research Progress of Waterborne Base Coat for Automobile

文风,冯俊,何国平,陈俊

DOI: https://doi.org/10.3969/j.issn.1009-1696.2011.08.008

2011-01-01

Abstract:The development status, and composition and painting technology of waterborne base coat at home and abroad were reviewed. The development trend of waterborne base coat was forecasted.
Preparation of Waterborne UV-Curable PUA Coating and Study on Synthesis Technology

李红强,葛会勤,赵建设,王经武,曾幸荣

DOI: https://doi.org/10.3969/j.issn.0253-4312.2007.07.001

2007-01-01

Abstract:The title UV-curable waterborne PUA prepolymers were synthesized by stepwise process with TDI,PEG,DMPA and HEMA as reactive monomers.When carboxyl groups were neutralized with TEA,PUA prepolymers could be easily dispersed in water in the form of self-emulsified latexes and the solid content of system reached 36%.The effects of stepwise and one-step processes on stability of system and film performance were studied.The influence of mol ratio of PEG and DMPA on performance and curing time of film were also investigated.It was found that stepwise process was superior to one-step process;as the decrease of mol ratio of PEG and DMPA,the rate of water adsorption of film will be decreased and then increased,while the gloss and curing speed of films decreased.In addition,photoinitiator content also had obvious effects on the curing time.
Synthesis and Waterborne Technology of UV-curing Epoxy Acrylate

ZANG Li-min,GUO Jin-shan,YANG Chao

DOI: https://doi.org/10.3969/j.issn.1007-9548.2010.07.012

2010-01-01

Abstract:Technology of UV-curing is a newtechnology that can save energy and protect environment.Epoxy arcylate is one of most widely used UV-curing oligomers for its environment friendly,low energy consumption,high efficiency,low shrinkage,good chemical stabilization and etc.Epoxy arcylate was synthesized via arcylic acid and epoxy resin NPER-032 as rawmaterials.The epoxy arcylate that was synthesized by first step was reacted with maleic anhydride to import carboxyl,then neutralized with organic amine.And waterborne UV-curable epoxy arcylate was synthesized.
Study on UV Curable Aqueous Polyurethane Coatings

胡飞,唐黎明,戴彧,李易,方宇

DOI: https://doi.org/10.3969/j.issn.0367-6358.2002.04.007

2002-01-01

Abstract:A series of aqueous acrylated polyurethane was synthesized by three steps and cured by UV radiation. The influence of the relative molecular mass of polyethylene glycol (PEG) and the molar ratio of PEG/dimethylolpropionic acid(DMPA) on the reaction and the properties of the coatings has been investigated. The cured coatings showed high performances in hardness, impact strength, adhesion and antifogging property.
Oligomer-in-water Emulsion Based Waterborne UV-curable Paints for Cotton Printing

Tao Zhang,Kairui Zhang,Tao Li,Chaoxia Wang,Fan Yang

DOI: https://doi.org/10.1108/prt-01-2013-0046

2014-01-01

Pigment & Resin Technology

Abstract:Purpose – The purpose of this paper is to prepare waterborne UV-curable pigment pastes for cotton fabric printing. Design/methodology/approach – O/W (oligomer-in-water) emulsions of polyurethane acrylate (PUA) oligomer in sodium dodecyl benzene sulphonate (SDBS) aqueous solution were prepared by ultrasonic emulsification method. Findings – The present work studies various factors affecting the stability and droplet size of the O/W emulsion stabilised by SDBS. The optimal emulsifier concentration was 2.5 per cent, under which condition the stability of the emulsion increased as the emulsifier content increased, with a subsequent decrease in the droplet size of the emulsion, while above which emulsion agglomeration occurred. Increasing the power and duration of ultrasonic dispersion resulted in increased emulsion stability and decreased droplet size, while increases in the oligomer content reduced the emulsion stability. Darocure 1173 mixed with PUA and then emulsified in the SDBS aqueous solution guaranteed uniform dispersion of the photoinitiator, resulting in faster curing speed. Originality/value – This paper presents a new method for making waterborne externally emulsified oligomers for UV curing, and finds that it is easy to convert the existing oligomers into waterborne equivalents by this method. Cotton fabrics printed with the oligomer emulsion based pastes were found to have good colour strength and crockfastness.

Research Progress of UV-curing water-borne coatings

Research Status and Progress of Photoinitiator

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Water-soluble UV Curable Urethane Methyl Acrylate Coating: Preparation and Properties

Ultraviolet Curing Coatings and its Progress

Preparation of Water-borne UV Coatings

Synthesis and Study of Novel UV-Curable Powder Coatings

The Research Progress of Water-borne Polyurethane in Wood Coatings

Research Progress of Waterborne Epoxy Resin Systems

Study Progress in Water-borne Polyurethane

Progress of Application of Inorganic Nano-Particles Modified with Coupling Agents in Waterborne Coatings

Research and applications of UV-curable conductive polymer materials

Application of Waterborne UV Curable Coating for Plastics

Research and Application Progress of Vacuum Ultraviolet (185 nm) in Water Treatment

Application of uv Cure Technology and Progress in Photopolymerization in China

Progress in Ambient Self-Crosslinking Technology of One Component Waterborne Coatings

The Research Progress of Waterborne Base Coat for Automobile

Preparation of Waterborne UV-Curable PUA Coating and Study on Synthesis Technology

Synthesis and Waterborne Technology of UV-curing Epoxy Acrylate

Study on UV Curable Aqueous Polyurethane Coatings

Oligomer-in-water Emulsion Based Waterborne UV-curable Paints for Cotton Printing