Abstract:In the field of lighter substitute materials, sandwich plate models of composite and hybrid foam cores are used in this study. Three core structures: composite core structure and then the core is replaced by a structure of a closed and open repeating cellular pattern manufactured with 3D printing technology. It finally integrated both into one hybrid open-cell core filled with foam and employed the same device (WBW-100E) to conduct the three-point bending experiment. The test was conducted based on the international standard (ASTM-C 393-00) to perform the three-point bending investigation on the sandwich structure. Flexural test finding, with the hybrid polyurethane/polytropic acid (PUR/PLA) core, the ultimate bending load is increased by 127.7% compared to the open-cell structure core. In addition, the maximum deflection increased by 163.3%. The simulation results of three-point bending indicate that employing a hybrid combination of PUR-PLA led to an increase of 382.3%, and for PUR–TPU by 111.8%; however, the highest value recorded with PUR/PLA, which has the slightest stress error among the tests. Also, it is reported that when the volume fraction of reinforced aluminum particles is increased, the overall deformation becomes more sufficient, and the test accuracy improves; for example, rising from 0.5% to 3%, the midspan deflection of composite (foam-Al) is increased by 40.34%. There were noticeable improvements in mechanical properties in the 2.5% composite foam-Al.

Metal Sandwich Plates with Polymer Foam-Filled Cores

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

An Experimental Investigation on Energy Absorption of Multi-layer Sandwich Structures with Metallic Corrugated Cores under Out-of-plane Compressive Load

Resistance of metal sandwich plates with polymer foam-filled core to localized impulse

3D Effect of Sandwich Panels with Aluminum-Foam-Filled Corrugated Plates Under Out-of-Plane Compression

Metal sandwich plates optimized for pressure impulses

High-velocity impact response of metallic sandwich structures with PVC foam core

Compressive Strength and Energy Absorption of Sandwich Panels with Aluminum Foam-Filled Corrugated Cores

Resistance of Metallic Foam‐filled Trapezoidal Plate Core Sandwich Plate to Blast Loading

Effects of Aluminum Foam Filling on Compressive Strength and Energy Absorption of Metallic Y-Shape Cored Sandwich Panel

Impulsive Response of Rectangular Metal Sandwich Plate with a Graded Foam Core

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Sandwich Plates with Functionally Graded Metallic Foam Cores Subjected to Air Blast Loading

Effects of Aluminum Foam Filling on the Low-Velocity Impact Response of Sandwich Panels with Corrugated Cores

Quasi-static and Low-Velocity Impact Behaviors of Steel-Aluminum Foam Sandwich Beams

Large deflection behavior of circular sandwich plates with metal foam-core

Sandwich Structures with Prismatic and Foam Cores: A Review

Vibration and Buckling Analyses of Sandwich Plates Containing Functionally Graded Metal Foam Core

Performance Enhancement of Sandwich Panels with Honeycomb–corrugation Hybrid Core

DYNAMIC RESPONSE OF CELLULAR METALLIC SANDWICH PLATES UNDER IMPACT LOADING

On low-velocity impact response of foam-core sandwich panels