Abstract:This work examines the performance of composite panels when subjected to underwater impulsive loads. The scaled fluid–structure experimental methodology developed by Espinosa and co-workers was employed. Failure modes, damage mechanisms and their distributions were identified and quantified for composite monolithic and sandwich panels subjected to typical blast loadings. The temporal evolutions of panel deflection and center deflection histories were obtained from shadow Moiré fringes acquired in real time by means of high speed photography. A linear relationship of zero intercept between peak center deflections versus applied impulse per areal mass was obtained for composite monolithic panels. For composite sandwich panels, the relationship between maximum center deflection versus applied impulse per areal mass was found to be approximately bilinear but with a higher slope. Performance improvement of sandwich versus monolithic composite panels was, therefore, established specially at sufficiently high impulses per areal mass (I0/M¯>170ms−1). Severe failure was observed in solid panels subjected to impulses per areal mass larger than 300ms−1. Extensive fiber fracture occurred in the center of the panels, where cracks formed a cross pattern through the plate thickness and delamination was very extensive on the sample edges due to bending effects. Similar levels of damage were observed in sandwich panels but at much higher impulses per areal mass. The experimental work reported in this paper encompasses not only characterization of the dynamic performance of monolithic and sandwich panels but also post-mortem characterization by means of both non-destructive and microscopy techniques. The spatial distribution of delamination and matrix cracking were quantified, as a function of applied impulse, in both monolithic and sandwich panels. The extent of core crushing was also quantified in the case of sandwich panels. The quantified variables represent ideal metrics against which model predictive capabilities can be assessed.

Performance and Failure of Metal Sandwich Plates Subjected to Shock Loading

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Metal sandwich plates optimized for pressure impulses

Preliminary Assessment of Sandwich Plates Subject to Blast Loads

Performance of Metallic Honeycomb-Core Sandwich Beams under Shock Loading

Metal Sandwich Plates with Polymer Foam-Filled Cores

Numerical research on response of hybrid corrugated sandwich plates subjected to combined blast and fragment loadings

Response of metallic pyramidal lattice core sandwich panels to high intensity impulsive loading in air

Large deflection behavior of circular sandwich plates with metal foam-core

Mechanical Response of Metallic Honeycomb Sandwich Panel Structures to High-Intensity Dynamic Loading

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

High-velocity impact response of metallic sandwich structures with PVC foam core

Low Velocity Impact Response of Preloaded CFRP/Aluminum Honeycomb Sandwich Plate

Dynamic performance of ultralight corrugated sandwich plate with FML face-sheets impacted by FSP-foam composite projectile

Impact performance analysis and optimization of X-sandwich panels

Nonlinear vibration analysis of the functionally graded sandwich plate under blast loading

Numerical Research on Blast-resistant Performance of Graded Corrugated Sandwich Plates under Air Blast Loading

Impact resistance of composite circular corrugated core sandwich structures

Numerical and Theoretical Study on Failure Characteristics and Damage Assessment Model of Curved Steel-Concrete-Steel Sandwich Shells Subjected to Impact Load

Failure Mechanisms in Composite Panels Subjected to Underwater Impulsive Loads

Investigation of dynamic response of circular sandwich plates with metal vertical tubes core under blast load