Abstract:As a key component of the Chinese Fusion Engineering and Test Reactor (CFETR), the blanket is responsible for tritium breeding, neutron shielding and energy conversion. Blankets can be classified into solid and liquidaccording to the form of tritium breeder. Among them, the solid blanket utilizes the pebble beds as both the tritium breeder and neutron multiplier, and it has been a popular scheme due to its advantages, such as good material compatibility and non-magnetohydrodynamic effects. However, it usually adopts beryllium or an alloy (i.e. Be and Be _12 Ti) for multiplying neutrons, causing a very high cost of the solid blanket due to the scarcity of natural resources of beryllium, and this hinders its development. In this paper, a novel solid blanket utilizing a PbLi eutectic alloy was proposed to make up the above deficiency. Pb _83 Li _17 is usually applied in a liquid blanket due to its lowmelting point. However, this kind of alloy can have a higher melting point by adjusting the atomic ratio of Pb/Li, and thus it can be used in the solid blanket both for the tritium breeder and neutron multiplier. Based on the blanket modular design of CFETR, the optimization of the radial layouts, the atomic ratio of Pb/Li and the packed structure of the pebble beds are studied through neutronic and thermal hydraulic analysis. The results indicate that the solid-type Pb _x Li _y can satisfy the requirement of tritium self-sufficiency, and the global tritium breeding ratio is larger than 1.0. In addition, the cooling system design can retain the maximum temperature of Pb _x Li _y at a lower level without melting. Overall, this kind of solid-type Pb _x Li _y blanket is feasible from the perspective of neutronic and thermal hydraulics, and it avoids using beryllium; thus, the cost is highly reduced.

The R&D on Multi-Functional Coatings for Liquid Metallithium-Lead Blankets of Fusion Reactors

A Preliminary Study on the Feasible Design of Bionic Blanket Concept

Innovative liquid breeder blanket design activities in Japan

Design, construction and experiment of liquid LiPb/PbBi eutectic loops for advanced nuclear reactors in China

Study on Aluminum Oxide Coating Preparation on the CLAM Steel by Air Plasma Spraying Process

R&D status of materials for test blanket modules in China

Thermal Hydraulic Analysis on the Water Lead Lithium Cooled Blanket for CFETR

Progress in design and development of series liquid lithium-lead experimental loops in China

Pre-conceptual Design and Proof of Principle Assessments of Self-Cooled Toroidally Symmetric Lead-Lithium (TSLL) Blanket

Conceptual Design of the Supercritical CO2 Cooled Lithium Lead Blanket for CFETR

Conceptual Design of Solid-Type Pb X Li Y Eutectic Alloy Breeding Blanket for CFETR

The Dual Functional Lithium Lead Test Blanket Module and the Testing Strategy for ITER

Compact fusion blanket using plasma facing liquid Li-LiH walls and Pb pebbles

Development of the high temperature PbLi experimental facility for CFETR

Implementation of CO2 and PbLi As Working Fluids in RELAP5/MOD3.3 Towards Accident Analysis of COOL Blanket for CFETR

Recent Research Progress on the Compatibility of Tritium Breeders with Structural Materials and Coatings in Fusion Reactors

Neutronics Analyses of COOL Blanket for CFETR

Consideration of Alumina Coating Fabricated by Sol-gel Method as MHD Coating against PbLi

Corrosion Experiments of the Candidate Materials for Liquid Lithium Lead Blanket of Fusion Reactor

Development of Advanced Blanket Performance under Irradiation and System Integration Through JUPITER-II Project

Neutronics experiments of dual functional lithium-lead blanket based on D-T fusion neutron source