Abstract:The supercritical carbon dioxide (S-CO2) cOoled Lithium-Lead (COOL) blanket is under development for China Fusion Engineering and Test Reactor (CFETR). The S-CO2 is adopted to cool the structural components, in which the key component First Wall (FW) dominates the total heat power due to the large plasma facing heat flux. In this paper, referring to the response of material temperature, coolant velocity and pressure drop, the thermal hydraulic optimization is firstly performed on the structure design (i.e. cross area and pitch of channel) using the single variable control method, and the optimization principle is that the outlet temperature remains as the same when the optimization variables are changed. Finally, the optimal structure design of FW is obtained, namely cross area of 12 x 12 mm2 and channel pitch of 5 mm. On basis of this, the comparative analyses are carried out using the different cooling system, structural material, i.e. Reduced Activation Ferritic Martensitic (RAFM) steel and Oxide dispersion-strengthened alloy (ODS) ferritic steel, as well as helium as coolant. Furthermore, the satisfied designs are obtained by referring to the constraints of coolant pressure drop and maximum temperature on the structural steel. Then, the thermal hydraulic designs of FW are continuously matching with the Power Conversion System (PCS) to ensure that the heat power removed by the S-CO2 on the primary side can be transferred to the secondary side. Finally, the achievable thermodynamic design are obtained, including the parameters of high operating pressure, turbine inlet temperature, split ratio as well as the thermoelectricity conversion efficiency. The results show that the high pressure of PCS should be larger than 25 MPa when the RAFM steel is used as the structure material, due to the limitation on the outlet temperature of FW. On the contrary, the ODS can raise the outlet temperature, which is beneficial for matching with the PCS, and the thermoelectricity conversion efficiency can reach up to 47.4 % at the high pressure of 25 MPa. The analyses results will provide useful guidance on the system design both for the Primary Heat Transfer System (PHTS) and PCS of CFETR.

Conceptual Design of the Supercritical CO2 Cooled Lithium Lead Blanket for CFETR

Neutronics Analyses of COOL Blanket for CFETR

Research on the thermal hydraulic design of COOL blanket for CFETR

Conceptual Design and Coupled Neutronic/thermal-Hydraulic/mechanical Research of the Supercritical Water Cooled Ceramic Blanket for CFETR

Thermal Hydraulic Analysis on the Water Lead Lithium Cooled Blanket for CFETR

Conceptual Design of a Helium-Cooled Ceramic Breeder Blanket for CFETR

Design of the Water-Cooled Ceramic Breeder Blanket for CFETR

Updated Design of Water-Cooled Breeder Blanket for CFETR

CONCEPTUAL DESIGN OF THE WATER COOLED BREEDER BLANKET FOR BOTH PHASES OF CFETR

Development of the high temperature PbLi experimental facility for CFETR

Implementation of CO2 and PbLi As Working Fluids in RELAP5/MOD3.3 Towards Accident Analysis of COOL Blanket for CFETR

Neutronics Analysis of Helium Cooled Ceramic Breeder Blanket with S-shaped Lithium Zone and Cooling Plate for CFETR

Thermal Hydraulic Optimization on the First Wall of COOL Blanket for CFETR

Neutronics and Thermo-Hydraulic Analysis of Water-Cooled Blanket Based on Pwr and Scwr Water Conditions for Cfetr

Preliminary Design and Analyses of the Helium Cooled Ceramic Breeder Blanket for CFETR Phase II

Thermo-Hydraulic Analysis Of The Optimized Helium Cooled Solid Breeder Blanket For Cfetr

Conceptual Design and Neutronics/Thermal-Hydraulic Coupling Optimization Analyses of Two Typical Helium Cooled Solid Breeder Blanket Modules for CFETR Phase II

Design and analysis of the equatorial inboard WCCB blanket module for CFETR

Progress on Design and Related R&D Activities for the Water-Cooled Breeder Blanket for CFETR

Conceptual Design Of A Blanket Module Integrated With Divertor For Cfetr

Preliminary Neutronics Design and Analysis of the Bit Helium Cooling Ceramics Blanket for Cfetr