Abstract:The Fe–Si–B amorphous ribbons with various CO ventilation amount were prepared by planar-flow melt spinning method. The effect of CO gas on surface quality, magnetic properties and core loss of amorphous ribbons were investigated. With the increasing CO ventilation, the wheel side surface roughness, average air pocket size and air pocket quality decrease, the ribbon grows thicker, but air side surface roughness remains almost no changes. The three samples have reached to a fully amorphous structure. Meanwhile the diffraction angle corresponding the maximum intensity of each broad diffraction peak decrease slightly with increasing CO ventilation. There is no significant differences in the onset temperate of second exothermic peak (Tx2) and the crystallization peak temperature (Tp1 and Tp2) among the amorphous ribbons prepared with various CO ventilation, but the onset temperate of first exothermic peak (Tx1) increases slightly with the increasing CO ventilation. The room temperature hysteresis loops of amorphous ribbons show that surface quality have significant effect on magnetic properties. The coercivity (Hc), core loss (P 1.35/50 ), magnetic polarization (B80) and permeability (µ) among the ribbons are improved with better surface quality, though the saturation magnetic flux density almost keeps same. Core loss are separated by the scaling theory, and experiment dates show a good agreement with the predicted data. Thus the scaling theory is suitable for Fe–Si–B amorphous alloys. The surface quality has more significant effect on hysteresis losses than eddy current loss at low frequency.

The Effect of Surface Etching and Dation on the Permeability Spectrum of Nanocrystalline Fe85-x Co X Nb7B8 Ribbon

Effect of Slight Surface Oxidation on the Dynamic Magnetization of Nanocrystalline FeNbBCu Ribbons

Effect of Annealing Temperature on Permeability and Giant Magneto-Impedance of Fe-based Amorphous Ribbon

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

Neutron Irradiation Effect on Permeability and Magnetoimpedance of Amorphous and Nanocrystalline Magnetic Materials

Effect of Applied Dc Fields on the Domain Wall Magnetization Processes of Fenbbcu Soft Magnetic Nanocrystalline Ribbons at Low Frequencies

The effects of nitridation on the permeability-frequency spectra in nanocrystalline Fe<sub>88</sub>Zr<sub>7</sub>B<sub>4</sub>Cu alloys

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Influence on the permeability of Fe73.5Si13.5B9 Cu1Nb3-xAlx under different annealing conditions

Effects of Microstructure on the Temperature Dependence of Relative Initial Permeability of NiCuZn Ferrites

Microwave Absorbing Performance Enhancement of Fe75Si15Al10 Composites by Selective Surface Oxidation

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Permeability spectra study of Fe73.5Si13.5B9Cu1Nb3-xAlx (x = 0, 0.1, 0.2, 0.4, 0.8 and 1.6)

Dependence of the Permeability-Frequency Spectra of Fe88Zr7B4Cu Alloys on Dc Magnetic Fields

Permeability–frequency spectra of Nanoperm alloys under different heat treatment conditions

Effects of Nitrogen Addition on the Microstructures and Soft Magnetic Properties of Nanocrystalline Fe86zr7b6cu1 Ribbons

Effect of CO gas on surface profile and magnetic properties of Fe–Si–B amorphous ribbons

The Effect of Cerium Substitution on Electromagnetic Properties of NiZn Ferrites