Abstract:The incorporation of 3D-printing principles with electrohydrodynamic (EHD) jetting provides a harmonious balance between resolution and processing speed, allowing for the creation of high-resolution centimeter-scale constructs. Typically, EHD jetting of polymer melts offers the advantage of rapid solidification, while processing polymer solutions requires solvent evaporation to transition into solid fibers, creating challenges for reliable printing. This study navigates a hybrid approach aimed at minimizing printing instabilities by combining viscous solutions and achieving rapid solidification through freezing. Our method introduces and fully describes a modified open-source 3D printer equipped with a frozen collector that operates at -35 °C. As a proof of concept, highly concentrated silk fibroin aqueous solutions are processed into stable micrometer scale jets, which rapidly solidify upon contact with the frozen collector. This results in the formation of uniform microfibers characterized by an average diameter of 27 ± 5 μm, a textured surface, and porous internal channels. The absence of instabilities and the notably fast direct writing speed of 42 mm·s-1 enable precise, fast, and reliable deposition of these fibers into porous constructs spanning several centimeters. The effectiveness of this approach is demonstrated by the consistent production of biologically relevant scaffolds that can be customized with varying pore sizes and shapes. The achieved degree of control over micrometric jet solidification and deposition dynamics represents a significant advancement in EHD jetting, particularly within the domain of aqueous polymer solutions, offering new opportunities for the development of intricate and functional biological structures.

Solid Freeform Fabrication of Thin-Walled Ceramic Structures Using an Electrohydrodynamic Jet

Mechanical and Dielectric Properties of 3D Printed Highly Porous Ceramics Fabricated Via Stable and Durable Gel Ink

Fused deposition fabrication of high-quality zirconia ceramics using granular feedstock

Fabrication and characterisation of ceramics via low-cost DLP 3D printing

Large-size Si3N4 Ceramic Fabricated by Additive Manufacturing Using Long-Term Stable Hydrogel-Based Suspensions

Cryo-Electrohydrodynamic Jetting of Aqueous Silk Fibroin Solutions

3D printing of ceramics with controllable green‐body configuration assisted by the polyvinyl alcohol‐based physical gels

4D printing of ceramic structures

Towards Microscale Electrohydrodynamic Three-Dimensional Printing

Hydrogel-based DLP 3D Printing of Dense Zirconia Ceramics

Preparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics

Electrohydrodynamic Jet Printing of Pzt Thick Film Micro-Scale Structures

Progress in Investigation on Rapid Freeform Fabrication of Advanced Ceramics

Large-size Si 3 N 4 ceramic fabricated by additive manufacturing using long-term stable hydrogel-based suspensions

UV-Curing Assisted Direct Ink Writing of Dense, Crack-Free, and High-Performance Zirconia-Based Composites With Aligned Alumina Platelets

Reimagining the shape of porous tubular ceramics using 3D printing

A Novel Aqueous Ceramic Suspension for Ceramic Stereolithography

Fabrication of porous aluminum ceramics beyond device resolution via stereolithography 3D printing

3D printing of dense structural ceramic microcomponents with low cost: Tailoring the sintering kinetics and the microstructure evolution

Preparation of excellent performance ZTA ceramics and complex shaped components using digital light processing 3D printing technology

Fabrication of Complex-Shaped Zirconia Ceramic Parts Via a DLP-stereolithography-based 3D Printing Method