Abstract:Calcium chloride is a very interesting electrolyte in that it is available, virtually free, in high purity form as a waste product from the chemical industry. It has a very large solubility for oxide ions, far greater than many alkali halides and other divalent halides and has the same toxicity as sodium chloride and also a very high solubility in water. Intuitively, on the passage of current, it is expected that calcium would be deposited at the cathode and chlorine would evolve at the anode. However, if calcium oxide is added to the melt, it is possible to deposit calcium and evolve oxygen containing gases at the anode, making the process far less polluting than when chlorine is evolved. This process is discussed in terms of the addition of calcium to molten lead. Furthermore, these reactions can be altered dramatically depending upon the electrode materials and the other ions dissolved in the calcium chloride. As calcium is only deposited at very negative cathodic potentials, there are several interesting cathodic reactions that can occur and these include the decomposition of the carbonate ion and the ionization of oxygen, sulphur, selenium and tellurium. For example, if an oxide is used as the cathode in molten calcium chloride, the favoured reaction is shown to be the ionization of oxygenO + 2e− → O2−rather thanCa2+ + 2e− → CaThe oxygen ions dissolve in the salt leaving the metal behind, and this leads to the interesting hypothesis that metal oxides can be reduced directly to the metal purely by the use of electrons. Examples are given for the reduction of titanium dioxide, zirconium dioxide, chromium oxide and niobium oxide and by mixing oxide powders together and reducing the mixed compact, alloys and intermetallic compounds are formed. Preliminary calculations indicate that this new process should be much cheaper than conventional metallothermic reduction for these elements.

The Cathodic Reduction Processes of SiO2 Impurity in Magnesium Electrolysis

The Cathodic Reduction of Magnesium in KCl-NaCl-MgCl2 Melts on a Platinum Electrode

Study of the electrochemical behavior of Ni(II) impurity in MgCl2–KCl–NaCl melt

Electrochemical behavior of magnesium ions in chloride melt

Electrochemical removal of impurity mg from LiCl-KCl melts

Electrochemical Behavior of Silicon in the (Nacl-Kcl-naf-sio 2 ) Molten Salt

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Study on the Cathodic Reduction Mechanism of B2O3 in Magnesium Electrolyte

Effect of the Electrolyte Solvent on Redox Processes in Mg-S Batteries

Anodic and Cathodic Reactions in Molten Calcium Chloride

Electrochemical Deposition of Magnesium on SiC Fibers from the LiCl-KCl-MgCl2Molten Salt

Electrochemical Investigations on Cathodic Reduction Processes at Graphite Electrode in LiCl-KCl Eutectic Melt

Electrochemical extraction of Ti5Si3 silicide from multicomponent Ti/Si-containing metal oxide compounds in molten salt

Study on Reductive Mechanism of Si Ion in KCl-NaCl-NaF-SiO2

Electrochemical separation of Fe(III) impurity from molten MgCl 2 -NaCl-KCl for magnesium electrolytic production

Mg2Si Promoted Magnesio-Mechanical Reduction of Silica into Silicon Nanoparticles for High-Performance Li-ion Batteries

Sol–gel synthesis of Mg1.03Mn0.97SiO4 and its electrochemical intercalation behavior

Contribution of the oxygen reduction reaction to the electrochemical cathodic partial reaction for Mg-Al-Ca solid solutions

Processing of Zirconium Oxide Raw Materials to Produce Zirconium Silicides via Electrolysis of KCl-K2SiF6-ZrO2 Melt

NiS2 Nanoparticles by the NaCl-assisted Less-Liquid Reaction System for the Magnesium-Ion Battery Cathode.

Electrodeposition of Silicon in the Low-Temperature LiCl-KCl-CsCl-K2SiF6 Melt Under Direct and Pulse Current