Abstract:The supercritical hydrothermal synthesis of nanomaterials has gained significant attention due to its straightforward operation and the excellent performance of the resulting products. In this study, the supercritical hydrothermal method was used with Zn(CH3COO)2·2H2O as the precursor and deionized water and ethanol as the solvent. Nano-ZnO was synthesized under different reaction temperatures (300~500 °C), reaction times (5~15 min), reaction pressures (22~30 MPa), precursor concentrations (0.1~0.5 mol/L), and ratios of precursor to organic solvent (C2H5OH) (2:1~1:4). The effects of synthesis conditions on the morphology and size of ZnO were studied. It was found that properly increasing hydrothermal temperature and pressure and extending the hydrothermal time are conducive to the more regular morphology and smaller size of ZnO particles, which is mainly achieved through the change of reaction conditions affecting the hydrothermal reaction rate. Moreover, the addition of ethanol makes the morphology of nano-zno more regular and significantly inhibits the agglomeration phenomenon. In addition to the change in physical properties of the solvent, this may also be related to the chemical bond established between ethanol and ZnO. The results show that the optimum synthesis conditions of ZnO are 450 °C, 26 MPa, 0.3 mol/L, 10 min, and the molar ratio of precursor to ethanol is 1:3.

Research Status of Nano-ZnO Prepared by Hydrothermal Method

Effect of UV irradiation on the properties of ZnO nanorod arrays prepared by hydrothermal method

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Preparation and Photoluminescence of ZnO with Nanostructure by Hollow-Cathode Discharge

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Research Progress in Growth of One-Dimensional ZnO Nanostructures and Preparing Methods of Related Devices

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Recent Progress in Hydrothermal Synthesis of Zinc Oxide Nanomaterials

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Preparation of dispersive zinc oxide nano-particles via hydrothermal modification route

Zinc Oxide Nanoparticles Synthesis Methods and its Effect on Morphology: A Review

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown From/on Zinc Substrates

Research progresses in preparation methods and applications of zinc oxide nanoparticles

Hydrothermal Synthesis of Well-Aligned ZnO Nanorod Arrays on Silicon

Effect of ammonia on morphology, wettability and photoresponse of ZnO nanorods grown by hydrothermal method

ZnO nanostructures: growth, properties and applications

Nanostructured ZnO: from Monodisperse Nanoparticles to Nanorods

Facile and Controllable Growth of ZnO 1D Nanostructure Arrays on Zn Substrate by Hydrothermal Process