Abstract:ABSTRACT:Objective To improve the understanding of CO2 corrosion mechanism at different temperature under multiphase flow condition. Methods The CO2 corrosion status of X70 steel under the condition of plug flow was simulated using the self-made ex-perimental device and the hanging plate experiment. The surface morphology, corrosion rate and online coupon corrosion situation were observed and analyzed by electron microscopy and electrochemical monitoring. The effect of temperature on the CO2 corrosion rate of X70 steel was focused on. Results The CO2 partial pressure had little effect on the corrosion rate, and the corrosion rate de-creased to a lower level when the temperature reached 90~98℃, due to the influence of corrosion product film;when the temper-ature was in the range of 60~80 ℃, the corrosion status of the hanging plate surface was not stable, and partial corrosion or uni-form corrosion occurred, which depended on the CO2 partial pressure. When the CO2 partial pressure was low, such as 0. 15 MPa, it was easy to form uniform corrosion, and when the CO2 partial pressure was high, such as 0. 6 MPa, it was easy to form partial corrosion. when the temperature was in the range of 40~80 ℃, the temperature at which the corrosion rate reached its maximum increased with increasing CO2 partial pressure, and the temperature range generally remained between 40~80 ℃ when the corro-sion rate reached its maximum. Conclusion The effect of temperature on the CO2 corrosion of X70 steel was closely related to the partial pressure of CO2 . At the same temperature, the corrosion rate increased with the increase of CO2 partial pressure, and the temperature of the corresponding maximum corrosion rate also increased. It was not accurate to say that the CO2 corrosion rate reached the highest at a certain temperature.

Effect of Temperature on CO_2 Corrosion Behavior of Tubular Steel

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effects of Temperature on CO2 Corrosion of X70 Steel under Multiphase Flow Condition

Effect Of Temperature On Corrosion Behaviour Of X70 Steel In High Pressure Co2/So2/O-2/H2o Environments

EFFECT OF TEMPERATURE ON PROPERTIES OF CO2 CORROSION SCALE OF N80 CARBON STEEL

Study on Corrosion Characteristics of Heat-resistant Materials in Supercritical Carbon Dioxide Environment Containing Oxygen Impurities

Corrosion Behavior of X65 Steel in Carbon Dioxide Solution under High Temperature and High Pressure

Effect of carbon dioxide on corrosion of tubular steel in high hydrogen sulfide and carbon dioxide environments

Effect of Temperature on Corrosion Behavior and Mechanism of S135 and G105 Steels in CO2/H2S Coexisting System

The Impact of Temperature on CO2 Corrosion and the Formation of Corrosion Product Film

Research of CO_2 Corrosion Kinetics of Tubing and Casing Steel P110

Experimental Study on Corrosion of J55 Casing Steel and N80 Tubing Steel in High Pressure and High Temperature Solution Containing CO2 and NaCl

Effect of Microstructure and Heat Treatment on Resistance of Steels to Carbon Dioxide Corrosion

Study of the corrosion behavior of N80 and TP125V steels in aerobic and anoxic shale gas field produced water at high temperature

Corrosion Behavior of J55 and N80 Carbon Steels in Simulated Formation Water under Different CO2 Partial Pressures

Wear Behavior of CO2 Corrosion Scales on Well Tube Steel N80 in Water-Sand Two-Phase Fluid Medium

CO2 Corrosion Behavior of High-Strength and Toughness V140 Steel for Oil Country Tubular Goods

Effect of CO2 Partial Pressure on the Corrosion Behavior of J55 Carbon Steel in 30% Crude Oil/Brine Mixture

Corrosion behaviors of steels under supercritical CO2 conditions

CO2 Corrosion of Low Carbon Steel Under the Joint Effects of Time-Temperature-Salt Concentration

Effect of Ti Microalloying on the Corrosion Behavior of Low-Carbon Steel in H2S/CO2 Environment