Abstract:Arsenite (As(III)) has higher toxicity and removal difficulty. Herein, three nanocomposite adsorbents (La(OH) 3 -Fe 3 O 4 , La 2 O 3 -Fe 3 O 4 , and La x Fe 3-x O 4 ) were prepared for As(III) adsorption removal to investigate the optimal form of Fe 3 O 4 -lanthanum composites. The materials were characterized by SEM, TEM, XRD, FT-IR, etc. The adsorption results showed that the maximum adsorption capacities (Q max ) of As(III) by La(OH) 3 -Fe 3 O 4 (1:1), La 2 O 3 -Fe 3 O 4 (1:2), and La 0.15 Fe 2.85 O 4 were 148.15, 120.60 and 161.22 mg/g, respectively. In addition, the removal efficiency of La 0.15 Fe 2.85 O 4 for As(III) could still reach 96.01% after 10 cycles, showing the good regeneration ability and stability. The kinetic and isotherm models showed that the adsorption process conformed to the pseudo-second-order and Langmuir isotherm models. Furthermore, the adsorption mechanism of La 0.15 Fe 2.85 O 4 for As(III) was analyzed by X-ray photoelectron spectroscopy. To improve the practical application of La 0.15 Fe 2.85 O 4 , a composite nanofiber membrane (La 0.15 Fe 2.85 O 4 /PAN) was prepared, and the As (III) removal efficiency of the membrane was investigated by static and dynamic adsorption through building a membrane filter. The results showed that La 0.15 Fe 2.85 O 4 /PAN had high Q max (94.66 mg/g), good regeneration ability and anti-interference ability. The results of dynamic adsorption indicated that La 0.15 Fe 2.85 O 4 /PAN with a diameter of 25 mm could reduce 535 mL of As(III) solution with an initial concentration of 50 μg/L to 10 μg/L at a flow rate of 0.5 mL/min under pH 7, indicating the membrane reactor had good processing capacity. This study confirmed the most favorable form of La-Fe composite for arsenic adsorption, and provided a composite membrane technology to realize its practical application for water treatment.

Research on As(Ⅴ) removal performance of ion exchange fiber

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

In-situ preparation of FeCo-Layered double hydroxides modified anion exchange resin D201 for As(V) effective removal from aqueous solutions

Effective Technique and Mechanism for Simultaneous Adsorption of As(III/V) from Wastewater by Fe-ZIF-8@MXene

Magnetic Zeolitic Imidazolate Frameworks Composite As an Efficient Adsorbent for Arsenic Removal from Aqueous Solution.

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Gamma-FeOOH based hierarchically porous zeolite monoliths for As(V) removal: Characterisation, adsorption and response surface methodology

Arsenic(V) Removal with a Ce(IV)-doped Iron Oxide Adsorbent.

Zeolite-based absorbent: Polyacrylic acid loading for enhanced ferric(III) removal from aqueous solution

Removal Technology and Mechanism of Arsenic From Wastewater by Zeolite Imidazole Framework-8@Carbon Nanodots

Removal Of Arsenic(Iii) From Aqueous Solution Using A Low-Cost By-Product In Fe-Removal Plants-Fe-Based Backwashing Sludge

Arsenate Adsorption by Hydrous Ferric Oxide Nanoparticles Embedded in Crosslinked Anion Exchanger: Effect of the Host Pore Structure.

ARSENATE SORPTION BY A NEWLY-DEVELOPED POLYMER-SUPPORTED HYDRATED IRON OXIDE

Removal of Arsenic Contaminants with Magnetic Γ-Fe2o3 Nanoparticles

Removal of As(V) Based on Amino-Group Surface-Functionalized Porous Silicon Derived from Photovoltaic Silicon Cutting Powder

Synthesis and herbicidal activity of novel N-(2,2,2)-trifluoroethylpyrazole derivatives.

Efficient removal of As (III) by a La/Fe composite membrane filter: The composite form of La, the dynamic adsorption and adaptability

FeS x @MOF-808 composite for efficient As(III) removal from wastewater: behavior and mechanism

Efficient As(III) Removal by Macroporous Anion Exchanger-Supported Fe–Mn Binary Oxide: Behavior and Mechanism

Removal of As(V) from aqueous solution using modified Fe3O4 nanoparticles

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide