Abstract:Electron beam welding (EBW) is widely used to connect thin-walled high-temperature alloy structures in aeroengines. However, the residual stress and deformation caused by the high-temperature gradients generated during welding would affect the rigidity, dimensional stability, and fatigue resistance of the welded structures. The study reported here used a model combining ellipsoidal and Gaussian rotating body heat sources to undertake a numerical simulation of the temperature and residual stress generated during the EBW process. The model was systematically refined by observing and measuring the molten pool morphology. The error rates for key dimensions determining the molten pool shape were less than 6%. With a microscope-based examination, the energy distribution characteristics were detected by the microstructure analysis of grain type and size in different regions to verify the viability of the heat source model. The residual stress of a butt welding was simulated by the proposed heat source model based on the full consideration of a full-loop thin-walled combustor casing structure and material properties. It was found that the average errors for longitudinal and transverse residual stresses of welded joints and their adjacent areas were 10% and 12%, respectively, by comparing with the experimental results. Simultaneously, the low cycle fatigue life of the welded combustor casing would be decreased by 32% considering the influence of welding residual stress. These conclusions can be used as a basis for studying the integrity of thin-walled welded structures in aeroengines.

Numerical Investigation of Residual Stress in Thick Titanium Alloy Plate Joined with Electron Beam Welding

Numerical Simulation of Temperature and Residual Stress Fields in Thick Plate EBM Welding

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

Numerical Simulation of the Residual Stress in Laser Beam Welded and TIG Welded Joints of Thin Plate of Titanium Alloy

Residual Stress Measurement in Electron Beam Welded Joints of 50mm Thick Titanium Alloy

Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Numerical and Experimental Analysis of Residual Stresses in Full-Penetration Laser Beam Welding of Ti6Al4V Alloy

Residual stress distribution of large thickness titanium alloy joints by electron beam welding

Numerical Investigation on the Variation of Welding Stresses after Material Removal from A Thick Titanium Alloy Plate Joined by Electron Beam Welding

3D Finite Element Numerical Simulation of Residual Stresses on Electron Beam Welded BT20 Plates

Measurements and computations of welding residual stresses in thick electron beam welded components

Numerical Simulation of Welding Residual Stresses in 6082-T6 Thin Aluminum Alloy

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

Effects of Welding Parameters on Weld Shape and Residual Stresses in Electron Beam Welded Ti2AlNb Alloy Joints

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

3D-FEM numerical simulation of welding stress in thin aluminum alloy plate

Study on Residual Stress and Numerical Simulation Technology of Welding to Thick Structure Construction

Evaluation on Residual Stresses in Thick Titanium Welded Alloys

Microstructure and mechanical properties of electron beam welded TC4 titanium alloy structure with backing plate

Numerical simulation of residual stress of butt-welded joint involved in complex column-beam welded structure