Abstract:This brief presents a 10-bits successive approximation register analog-to-digital converter (ADC) with a sampling rate of 1 kS/s for implantable medical devices. This ADC is implemented in a 65-nm CMOS process in which leakage current will be a key design parameter. It imposes the highest degree of simplicity in the design of the ADCs architecture. Thus, the transistor count is minimized, which reduces not only the active power, but also the number of leakage sources. The modified top-plate $V_{\mathrm{ cm}}$ -based switching offers energy efficient switching at the capacitive-DAC (CDAC) and uses simple control logic. In addition, the proposed asymmetrical metal-oxide-metal capacitor reduces the size of the CDAC by 90% for a given gain error. Furthermore, the input referred offset voltage of the dynamic comparator can be improved by the top-plate $V_{\mathrm{ cm}}$ -based switching method at system level without using any additional transistor. The other building blocks are also simplified for lower power consumption. This ADC occupies an area of 0.046 ${\mathrm{ mm}}^{2}$ . At 0.9 V and 1 kS/s, the 10-bits ADC consumes 5.8 nW, in which, 2.34 nW is contributed by leakage power consumption. The ADC achieves 9.1-ENOB and an energy efficiency of 10.94-fJ/conversion step.

Enhanced Successive Approximation ADC Based on Dynamic Element Matching Technique

Design of an 8-Channel 12bits 1MSPS SAR ADC

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

2.5-V1 MS/s 12-Bit Successive Approximation Analog-to-Digital Converter

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

A High-Performance, Low-Power Σ Δ ADC for Digital Audio Applications

Low-Power Successive Approximation ADC Design Using Switched-Opamp

An 8 Bit 12 MS/s Asynchronous Successive Approximation Register ADC with an On-Chip Reference

A Successive Approximation ADC Applied in AGC Loop of RF Receiver

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

Low Power High Precision Successive Approximation Register Analog to Digital Converter

A 14-Bit 1.0-Gs/S Dynamic Element Matching Dac With > 80 Db Sfdr Up To The Nyquist

A Power-Efficient 16-Bit 1-Ms/s Successive Approximation Register Analog-to-Digital Converter with Digital Calibration in 0.18 Μm Complementary Metal Oxide Semiconductor

A 1.8-V 11-Bit 40-Ms/s 21-Mw Pipelined ADC

A 1.8-V 22-mW 10-bit 30-MS/s Pipelined CMOS ADC for Low-Power Subsampling Applications

A 6bit 550Ms/s small area low power successive approximation ADC

An 11-Bit 500 MS/s Two-Step SAR ADC with Non-Attenuated Passive Residue Transfer.

A 5.8 nW 9.1-ENOB 1-kS/s Local Asynchronous Successive Approximation Register ADC for Implantable Medical Device

A 1.8-V 22-Mw 10-Bit 30-Ms/s Subsampling Pipelined CMOS ADC.